Cobalt Networks 9323 owner manual Presets, AES Input, Controls, Video Proc

Menu	Item	Format	Description
			This gives the board a
	Card Name	Up to 6 ASCII	unique name that will
			show up in the device list.
	Selected Preset	Range (1 - 16)	Loads parameters
			previously saved.
	Preset Name	Up to 6 ASCII	Gives a unique name to
Presets			the preset being saved.
			Saves the parameters as
	Preset Save	Confirm	preset selected and preset
			name entered.
	Preset Load	Confirm	Loads parameters of
			selected preset.
	Reset Current	Confirm	Will load factory presets
	Preset		and overwrite the save.

Menu	Item	Format	Description
			This will bypass sample
		On	rate conversion on AES.
			If bypassed AES rate
	AES Pair 1-8 SRC
			must match input video
	Bypass		rate or audio dropout will
		Off	occur. SRC must be
AES Input			bypassed to embed Dolby
Controls			encoded audio.
	AES Pair 1-8	On	AES output pair X will
			be a low latency copy of
	Passthrough	Off
			AES input pair X.
	AES Pair 1-8	On	Embeds with low (<1 ms)
	Zero Delay		latency. Overrides routing
		Off
			choices.

Menu	Item	Format	Description
	Video Gain	Range 0-2000	Gain applied to Y (Luma).
			1000 is unity.
Video Proc
	Video Lift	Range (-999) – 999	Lift applied to Y (Luma),
			in 10 bit code value.
	Color Gain	Range 0-2000	Gain applied to C
			(Chroma). 1000 is unity.
	Color Phase	Range (–360) – 360	Phase of C (Chroma) in
			degrees.
	Reset to Unity	Confirm	Resets all of the proc
			controls to unity.

Page 22 of 28 9323 Owner’s Manual • (V 2.1)