` 16 mac001 1200DPI 80LPI | |
|
|
Daily Use
Switching On and Off
SWITCHING ON
1.If the Indicator is not lit, then the TV set is powered off.
You must press the 
/OFF button on the TV set.
The set will switch to
2.Press the 
/OFF button, UP/DOWN button or NUMBER button on the remote controller or UP/DOWN button on the TV set.
The TV set will be switched on and then the Indicator will change to Green.
SWITCHING OFF
1.Press the 
/OFF button on the remote controller to return the set to its
Daily Use
Programme Selection
The set has 100 programme numbers, PR00..PR99.
DIRECT SELECTION
The NUMBER buttons are used for direct programme selection.
To select a
UP/DOWN SELECTION
You can also select a programme by pressing step by step the UP/DOWN buttons.
Picture Control
ENGLISH
2.Press the 
/OFF button on the TV set to switch the TV set off completely.
NOTE: If you don’t use the set for extended periods of time, unplug the AC cord from Power outlet.
Status
1.Call up the Picture menu.
2.Select and adjust the level of each function:
“Brightness”, “Contrast”, “Colour”, “Sharpness”.
The adjusted levels are stored automatically in Favourite mode.
P i c t u r e | B r i g h t n e s s | 7 5 | - | + |
S o u n d | C o n t r a s t | 5 0 | - | + |
F e a t u r e s | C o l o u r | 3 0 | - | + |
S e t u p | S h a r p n e s s | 4 6 | - | + |
| T i n t | 0 | - | + |
| Z o o m |
|
| 1 6 : 9 |
Select | Adjust |
|
| Exit |
The STATUS button( 
) is used to display the current status; Mode (AV, Component, PC) and Signal information for 2 seconds.
In TV mode, the Programme number and Station Name, Sound mode are displayed.
AV1
PAL 50Hz/4.43MHz
NOTE: Tint is displayed only when receiving a NTSC signal.
Only Brightness and Contrast are displayed in PC mode.
SMART PICTURE SELECTION
When you press the PICTURE button( 
)
repeatedly, you can call up four pictures settings;
Normal 
Bright 
Dark 
Favourite 
Normal 
PR 12 - - - - -
NICAM Stereo
16 | 17 |