PLASMA DISPLAY HANGER UNIT
INSTALLING WALL FRAME SET B AND CONNECTING FRAME
1INSTALLING WALL FRAME SET B AND CONNECTING FRAME.
Frame set B
Connecting Frame
.Place frame set B on the left and right side of the unit and use the enclosed screws (M5) to secure them tightly.
.PleaseNote be sure to not force an adjustment when connecting frame
.set B and connecting frame. Otherwise, it will create problems when connecting to frame set A.
2ATTACHING PAPER PATTERN PLAN ON THE WALL
.Place the enclosed paper pattern plan (actual size) on the wall with glue or tape.
Paper pattern plan |
.Drill holes on the wall as indicated on the paper pattern plan with a hand drill (power drill) and hammer in the concrete anchors (8) firmly.
Hand drill
HW A A N L G L E
R
U
N
I
T
8