Daewoo DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3 Parts of the Remote Controller

Parts of the Remote Controller

MUTE		POWER
DVB/Analog	AV	MULTIMEDIA
1	ABC		DEF
	2	3
GHI	JKL		MNO
4	5	6
PQRS	TUV		WXYZ
7	8	9
PICTURE	0
PR			VOL
	MENU
PR			VOL
OK/SELECT	GUIDE SUB TITLE CANCEL/EXIT
STILL	RECALL	ASPECT
EDIT	SLEEP	S.EFFECT

MGDI

1. (MUTE) : Press this button, and the sound goes off. Press again, and the sound returns.

2. (POWER) :TV on/off button in Stand-By mode.

3.DVB/Analog : Each time you press this button, the TV will cycle through: Analog TV => DVB-T => Analog TV

4.AV : Each time you press this button, the TV will cycle through : TV => AV1 => AV2 => AV3 => S-Video => TV

Note : If TV is working in Analog mode, Screen will be unchanged ana- log mode into DVB-T mode when pressing the“AV”button on the remote controller.You should press the“DVB/Analog”button on the remote con- troller.

5.MULTIMEDIA :Each time you press this button,the TV will cycle through: Component => PC => HDMI => Component

6.NUMBER : Press the numbers on this board, you can select PR directly

in TV mode.

(EX.When you want to select PR10,you should press down“1” and“0” within 2 second.If you only press down“1”,after 2 second,PR1 will be selected.)

Note :When the current state is ST-BY, you can turn on the TV using the digit key.Then programme is selected according to digit number.

7.PICTURE MODE : Picture modes change as follows : Normal => Cinema => Dynamic => Favourite => Normal

8. (MTS) : You can select sound mode in Mono, Stereo, Dual1, Dual2, NiCAM STEREO. It works only in Analog TV mode.

9.: Change channels on your TV.

10.: Adjust the volume

11.Cursor (UP, DOWN, LEFT, RIGHT) : move the cursor (UP / DOWN / LEFT / RIGHT) in the menu.

12.MENU : Menu display button.

13.OK/SELECT: Confirm to change a part of the DVB-T menu (Program Guide, DVB Setup, etc.)

14.GUIDE : Access Electronic Program Guide (EPG). It works only in DVB-T mode.

15.SUB TITLE:Select the Subtitle Language.It works only in DVB-T mode.

16.CANCEL/EXIT:Exit from the DVB-T menu (Program Guide,DVB Setup,etc.)

17.RECALL [] : Display the present modes (Analog/DVB-T, AV/S-Video, Component, PC/HDMI) and Signal information for 4 seconds.

Note : In Analog TV mode, you can see information about the Programme number, Sound, and Clock. In DVB-T mode, you can see information about a channel number, name, broadcasting time, audio service and more.

24