Daewoo DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3 Adjustment of Time

Utilities

Adjustment of Time

1.Setting the Clock.

•Move to Timer in the Utilities menu.

•To go to the Time, press the “RIGHT￿” button.

•Place the cursor to Hour / Minute with“￿LEFT/RIGHT￿” buttons.

•Set the Hour / Minute with the “￿UP/DOWN￿” buttons.

•Press the Menu button to initialize Time.

Note :

•The Time is clear when you turn the AC off, but if you select a pro- gram of your country which has Teletext or PDC transmission, the clock will be set and corrected automatically.

2.Setting the Wake up time / Program / Volume.

•Move to Timer in the Utilities menu.

•To go to the Wake Up, press the “￿UP/DOWN￿” buttons.

•Select the Wake Up to “On”.

•Set On Timer, Program and Volume in a same way to the above for the Clock.The set will be turned on at selected time.

Note :

•Confirm the Time is set.The Wake up time is only available when the Time is set.

•If adjusted once, the On Timer continues to operate everyday unless canceling setup or turn the AC power off.

•It is a convenient method to wake you up in the morning

3.Set up of Off Time.

•By pressing the SLEEP button on the remote controller repeatedly, you can select one of the following settings:

Sleep Timer: Off => 15 => 30 => 60 => 90 => 120 => Off

•The set will turn off after the time you select.

Note :

•If an active signal is not present for about 30 minutes, the set will au- tomatically turn to Stand-by mode.

MENU

MENU

	Timer
Time		12 : 00
Wake up		Off
On Timer		- - : - -
Program		PR01
Volume				20
Move	Adjust		Exit

	Timer
Time
		12 : 00
Wake up		On
On Timer		06 : 00
Program		PR01
Volume				20
Move	Adjust		Exit

OK/SELECT GUIDE SUB TITLE CANCEL/EXIT

STILL RECALL ASPECT

EDIT SLEEP S.EFFECT

MGDI

44