DirecTV RC65 manual Installing Batteries, Setting Up Your Directv Remote

INSTALLING BATTERIES

1.On the back of the remote control, push down on the door (as shown), slide the battery cover off, and remove the used batteries.

2.Obtain two (2) new AA alkaline batteries. Match their +and - marks to the + and - marks in the battery case, then insert them.

3.Slide the cover back on until battery door clicks into place.

CONTROLLING YOUR DIRECTV® RECEIVER

The DIRECTV® Universal Remote Control comes programmed to work with most DIRECTV receivers. Should the remote control not work with your DIRECTV Receiver, you will need to set up the remote control by performing the following steps.

Setting Up Your DIRECTV Remote

1.Locate the DIRECTV Receiver's brand and model number (on the back or bottom panel) and write it in the spaces below.

BRAND: ......................................................................

MODEL: ......................................................................

7