Runco PL-61DHD manual Computer/Video Signal

Page 58

Maintenance and Troubleshooting

Table 5-1. Troubleshooting Chart (continued)

Symptom

 

Possible Cause(s)

 

Solution

 

 

 

Image is too bright and/or

• Contrast is set too high.

• Lower the contrast setting.

lacks definition in the bright

 

 

 

 

areas of the image.

 

 

 

 

 

 

 

 

Image appears “washed out”

• Brightness is set too high.

•

Lower the brightness

and/or dark areas appear too

 

 

 

setting.

bright.

 

 

 

 

 

 

 

Colors in the image are

• The Red/Pr, Green/Y or

• Ensure that the source

swapped; for example, reds

 

Blue/Pb outputs from the

 

outputs are connected to

appear blue or vice versa.

 

source are connected to

 

the correct DHD Controller

 

 

the wrong inputs on the

 

input.

 

 

DHD Controller.

 

 

 

• The Red, Green or Blue

• Ensure that the DHD

 

 

(analog) outputs from the

 

Controller outputs are

 

 

DHD Controller are

 

connected to the correct

 

 

connected to the wrong

 

inputs on the PlasmaWall.

 

 

inputs on the PlasmaWall.

 

 

 

 

 

RGB-HD images appear

• Clock and Phase settings

• Adjust Clock and Phase

“noisy.”

 

need adjustment.

 

settings (refer to ISF Night

 

 

 

 

- Input Color on page 41).

 

 

 

 

 

“Out of range” appears

•

The resolution and

•

Select a compatible

on-screen.

 

frequency of the video

 

resolution and vertical

 

 

card in the computer are

 

frequency (refer to

 

 

not compatible with the

 

Computer/Video Signal

 

 

PlasmaWall.

 

Compatibility on

 

 

 

 

page 58).

 

 

 

 

The image is too large or too

•

Image size needs

• Adjust the image size (refer

small.

 

adjusting.

 

to Input Position on

 

 

 

 

page 39).

 

 

 

 

 

48

Runco PlasmaWall Owner’s Operating Manual

Page 57 Page 59
Image 58
Page 57 Page 59
Contents PL-61DHD Page Three Year Limited Warranty For Plasma DisplaysRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Safety Precautions DOC Compliance NoticeTable of Contents Operation Maintenance and TroubleshootingSpecifications Serial CommunicationsList of Figures List of Figures Introduction About This ManualSignificance. They also provide supplemental information Using This ManualCertain features Degrade performance or cause a malfunctionDescription, Features and Benefits Key Features and BenefitsOptional Accessories Controls and Functions Controls and IndicatorsPlasmaWall at a Glance Input SELECT/EXIT Power on/off switch does not disconnect the plasma displayMENU/ENTER AUDIO1, AUDIO2, AUDIO3 External Speaker OutputsCOMPONENT1 IR Sensor DHD Controller Front PanelRunco Icon Vacuum Fluorescent DisplayEnter Button UP ButtonLeft Button Down ButtonDHD Controller Rear Panel HD1 / HD2 Analog BNC connectorsComponent Video RCA connectors DVI OUTRS-232 Control Port Main Power SwitchComposite Video Input Main AC FuseDHD Controller Remote Control DHD Controller Remote ControlLight IR Output IndicatorEnter MenuISF DAY CinemaSVC CustInstallation Remote ControlOther surfaces Installation specialist Quick SetupStep Procedure For Details, refer to Mounting the PlasmaWall InstallationConsiderations On a Wall or Table StandOther Considerations VentilationProlong operating life Connections to the PlasmaWall and DHD Controller Connecting PlasmaWall to the DHD ControllerDHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall Connecting Source DTV or Progressive Component YPbPr Source To work Refer to Computer/Video Signal Compatibility on page 58 forAnalog Computer RGB Connections See Figure Some Macintosh computers may require a Macintosh videoComposite/S-Video/Component Video Connections See Figure Composite, S-Video and Component Video ConnectionsRS-232 Controller Connection11. Installing the Cable Clamps Cable ManagementInstallation Turning on the Power OperationSelecting the Input Source Setting the PC Display Properties You must enter a passcode to access the Service menuOperation Using the On-Screen Menus Input Source ISF PresetsService Aspect RatioAspect Ratio Main MenuInput Source HD Pass Thru 1 HD Pass ThruAspect Ratio Settings Remote Aspect Ratio Control Description KeyPicture Picture Brightness Contrast Color Tint SharpnessTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position ResolutionInput Position Left/Right Up/Down Width Height Overscan Information ISF PresetsISF Presets ISF Night ISF Day Custom Save Factory Default Serial Number Hardware Firmware 0002.002B Date Mar 24ISF Day Display Color Refer to ISF Night Display Color You must enter a passcode to access the Calibration menuGain/Offset Refer to ISF Night Display Color, above CalibrationService Should be used by ISF-certified technicians onlyInput Names Restore Composite Video Component SD Button takes you from top to bottom in the left column, thenDisabled HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUVOperation Operation Troubleshooting Tips Maintenance and TroubleshootingSymptom Possible Causes Solution Computer/Video Signal Value Description Min/max Stored? Power On/Off Commands CommandSerial Communications Aspect Ratio Commands Image Preset Commands Value Description Min/max Stored? Input Position Commands Output Shift CommandsBkgnd Serial Communications Specifications PlasmaWall SpecificationsDHD Controller Specifications PlasmaWall Dimensions PlasmaWall Model PL-61DHD DimensionsComputer/Video Signal Compatibility Computer/Video Signal Compatibility ChartSUN Specifications Page Runco CL-810 Owner’s Operating Manual
Related manuals
Manual 68 pages 9.69 Kb

PL-61DHD specifications

The Runco PL-61DHD is a premium plasma television that has captured the attention of home theater enthusiasts since its introduction. With a striking 61-inch display, this model combines advanced technology with elegant design to create a stunning viewing experience.

One of the standout features of the PL-61DHD is its impressive picture quality. The television boasts a full HD resolution of 1920 x 1080 pixels, which ensures that every image is sharp and vibrant. This high resolution, combined with Runco's proprietary video processing technology, delivers exceptional color accuracy and contrast, making it suitable for a range of content from movies to sports broadcasts.

The PL-61DHD employs Runco's unique Color Fidelity technology, which enhances the precision of colors on the screen. This technology ensures that viewers experience shades that are true to life, which significantly elevates the overall viewing experience. Moreover, the plasma panel excels in black levels and contrast ratios, providing deep blacks and bright highlights that make images pop.

Another impressive feature of the PL-61DHD is its ambient light rejection capability. This allows the television to perform remarkably well in various lighting conditions, making it versatile for different room environments. Whether in a dimly lit theater room or a bright living space, the PL-61DHD adapts to deliver optimal performance.

To facilitate seamless connectivity, the Runco PL-61DHD includes multiple input options, such as HDMI and component video. This range of connections allows users to hook up various devices, including Blu-ray players, gaming consoles, and streaming devices, maximizing the television's usability and making it a central hub for home entertainment.

The build quality of the PL-61DHD reflects Runco's commitment to excellence. The sleek and stylish design not only enhances the aesthetics of any room but is also engineered for durability. The unit’s robust construction ensures longevity, making it a solid investment for avid home theater enthusiasts.

In conclusion, the Runco PL-61DHD stands out in the world of high-end televisions due to its unparalleled picture quality, advanced technology features, and stylish design. It is a definitive choice for anyone looking to elevate their home viewing experience, making it a timeless addition to any home theater setup.
Top Page Image Contents