![](/images/new-backgrounds/1125188/12518865x1.webp)
Additional Operation - DVD part
Video Mode Setting DVD VCD2.0 VCD1.1
With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or
To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved.
Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE4 →
MODE5 → MODE1
If you turn off the the power, the video mode will be back to initial state (MODE1).
Notes on MP3 Discs
About MP3
An MP3 file is audio data compressed by using MPEG1, the audio
The player can not read a fake MP3 file that has a file extension “.mp3”.
MP3 Disc compatibility with this player is limited as follows:
1.Sampling Frequency / only at 44.1kHz
2.Bit rate/ within 32 - 320kbps
3.
4.If you record MP3 files using the software which cannot create a FILE SYSTEM, for example “Direct- CD” etc., it is impossible to playback MP3 files. We therefore recommend that you use
5.A single session disc requires MP3 files in the first track. If there is no MP3 file in the 1st track, it can- not playback MP3 files. If you wish to playback MP3 files, format all the data in the disc or use a new one.
6.File names should be named using 8 letters or less and must incorporate the “.mp3” extension
e.g. “********.MP3”.
7.Do not use special characters such as “_?!><+*}{`[@ ]:;\/.,” etc.
8.Total number of files on the disc should be less than 200.
9.Use
This DVD player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
Customers should also note that permission is required in order to download MP3 files and music from the Internet. Our company has no right to grant such per- mission. Permission should always be sought from the copyright owner.
OPERATION
33