Sanyo TLS-9072 Alarm Recording Counter Display, Connections to the Alarm IN/OUT Terminals

Page 22

ALARM RECORDING

Alarm Recording Counter Display

XDuring alarm recording, “AL” will be flashing on the digital display.

XIf the ON SCREEN switch is set to the “ON” position, the number of alarms will flash on the monitor screen.

XThe maximum display number of alarm recordings is “999”, at the next alarm recording the counter will indicate “000”.

XWhen the (ALARM TIME) menu is displayed, press the MENU RESET button to reset the alarm counter to “000” (all the data of the (ALARM TIME) menu is reset).

Connections to the ALARM IN/OUT Terminals

XAlarm input signal

Connect a make-contact (no voltage) switch between the ALARM IN and COM terminals.

XAlarm output signal

Normally DC 5V are output between the ALARM OUT and the COM terminals. When an alarm input (trigger) is received and the unit is recording, the output falls to 0V. Once the alarm recording is over, the output returns to DC 5V.

Checking the Alarm Recordings Time

1Press the MENU button until the (ALARM TIME) menu is displayed.

øThe number of alarm recordings, and the 8 most recent alarm recording times are displayed.

@@@@@@<ALARM@TIME>

@@@@008@12-25@19:00

@@@@@@@@11-25@23:00

@@@@@@@@11-25@15:00

@@@@@@@@10-25@08:00

@@@@@@@@10-25@06:00

@@@@@@@@09-25@20:00

@@@@@@@@09-25@16:35

@@@@@@@@09-25@10:52

NOTE:

XThe data for the previous alarm recordings is erased.

2Press the SEARCH/AUDIO ON button, the normal screen is displayed.

NOTE:

XIf the MENU RESET button is pressed while the (ALARM TIME) menu is displayed, the displayed data is erased. “AL” will be erased from the digital display.

English

21

Image 22

Contents TLS-9072 For the customers in Canada PrecautionsMoisture Condensation Problems LocationAccessory FeaturesContents Locations of Controls and Indicators Front PanelOperation Mode Indicator Locations of Controls and IndicatorsOperation Indicators OFF indicatorBack Panel I H G FPower Cord Installation ConnectionsON-SCREEN Menus Power FAILURE/DEW/USED Time menu Timer SET menuAlarm Time menu ON-SCREEN MenusDay of week is set automatically Setting the Language and ClockSetting procedure is now completed Last 2 digits only are displayedChanging the Date/Time Display Position Changing the ON-SCREEN DisplaySelecting the On-screen Display Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function If no tape management data is present on the tape Tape Management FunctionOperation If tape management data is present on the tapeSetting the Tape Management Function Tape Management FunctionTape Management Conflict Display Conflict display sampleNormal Recording Recording Speed ModePause/Still indicator N blinks Normal Recording Before startingNormal Recording Changes to the Recording Speed Mode During RecordingAction to Take when the Video Signal Deteriorates Concerning the Number of Times Tapes can be Rerecorded on Recording Check Setting the Mode at the End of the Tape Clog Detection Autorepeat Recording Repeat indicator will lightAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Alarm Recording SettingConnections to the Alarm IN/OUT Terminals Alarm RecordingAlarm Recording Counter Display Checking the Alarm Recordings TimeAlarm Scan Alarm SearchProgram Timer Recording Program Timer Recording Day of the week of the 8th line is flashingTo Cancel a Program Timer Recording Setting the HolidaysChanging a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Normal Playback Still Image Special PlaybackPicture Search Forward and Reverse Field AdvanceDay/Time Search DAY/TIME SearchD Search 01 0000 will be displayed on screen Tape Counter Setting the Security LockCounter will be reset to 0H 00M 00S Is displayed on the digital displaySetting the Buzzer @@@@POWER@FAILUREOutput Terminals Tape END OUT Terminal Output SettingSW OUT Terminal Output Setting Tape END OUT TerminalRemote Jack Remote control settingOutput Terminals COM TerminalMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeRC4Q/NA