Sanyo TLS-9072 instruction manual Normal Playback

Page 29

NORMAL PLAYBACK

Normal Playback

1Turn on the power to the VCR and TV monitor.

2Load the video cassette tape.

3Press the REC/PLAY SPEED l (or j) button to select the playback speed mode.

øThe selected playback speed mode is displayed on the digital display.

NOTE:

XA slow motion effect or accelerated playback effect can be achieved by using a slower or faster playback speed than the speed used for recording.

4Press the PLAY button.

øPlayback starts.

øIf necessary, adjust the tracking to eliminate the noise from the picture.

øIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

5To stop playback, press the STOP button.

øTo advance or rewind the tape, press the FF or REW button.

NOTES:

XIf a tape recorded in SP mode on a standard VCR is loaded, playback will be done in 2-hour mode.

XA tape recorded on a time lapse VCR produced by another manufacturer may not play back with the same degree of clarity on this unit.

Tracking Control

If there is noise in the image during playback,

1While looking at the playback picture, press and hold the TRACKING/V. STILL+ button to minimize the noise.

2If it cannot be minimized, press the TRACKING/V. STILL– button.

Vertical Lock Control

During still image mode,

1Press and hold the TRACKING/V. STILL+ button to reduce the vertical rolling of the image.

2If it cannot be corrected, press the TRACKING/V. STILL– button.

Sharpness Control

Turn the SHARPNESS control clockwise or counterclockwise for the desired sharpness of the image.

Audio Playback

XAudio playback is only possible in 2-hour, 12-hour and 24-hour modes.

XThe playback speed has to be the same as the recording speed, for normal playback of the audio.

XFor a tape recorded in 12-hour and 24-hour recording modes, to playback the audio, press the

SEARCH/AUDIO ON button after pressing the PLAY button. “?” will be displayed to the left of the playback speed on the digital display.

NOTE:

XNoise will appear in the image when audio playback is used in 12- or 24-hour modes.

28

English

Image 29
Contents TLS-9072 Moisture Condensation Problems PrecautionsFor the customers in Canada LocationContents FeaturesAccessory Front Panel Locations of Controls and IndicatorsOperation Indicators Locations of Controls and IndicatorsOperation Mode Indicator OFF indicatorI H G F Back PanelConnections Power Cord InstallationON-SCREEN Menus Alarm Time menu Timer SET menuPower FAILURE/DEW/USED Time menu ON-SCREEN MenusSetting procedure is now completed Setting the Language and ClockDay of week is set automatically Last 2 digits only are displayedSelecting the On-screen Display Changing the ON-SCREEN DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Operation Tape Management FunctionIf no tape management data is present on the tape If tape management data is present on the tapeTape Management Function Setting the Tape Management FunctionConflict display sample Tape Management Conflict DisplayPause/Still indicator N blinks Recording Speed ModeNormal Recording Normal Recording Before startingAction to Take when the Video Signal Deteriorates Changes to the Recording Speed Mode During RecordingNormal Recording Concerning the Number of Times Tapes can be Rerecorded onClog Detection Setting the Mode at the End of the TapeRecording Check Alarm Mode setting is flashing Repeat indicator will lightAutorepeat Recording Autorepeat RecordingAlarm Recording Setting Alarm RecordingAlarm Recording Counter Display Alarm RecordingConnections to the Alarm IN/OUT Terminals Checking the Alarm Recordings TimeAlarm Search Alarm ScanProgram Timer Recording Day of the week of the 8th line is flashing Program Timer Recording Changing a Program Timer Recording Setting the Holidays To Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Normal Playback Picture Search Forward and Reverse Special PlaybackStill Image Field AdvanceD Search 01 0000 will be displayed on screen DAY/TIME SearchDay/Time Search Counter will be reset to 0H 00M 00S Setting the Security LockTape Counter Is displayed on the digital display@@@@POWER@FAILURE Setting the BuzzerSW OUT Terminal Output Setting Tape END OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalOutput Terminals Remote control settingRemote Jack COM TerminalMaintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4Q/NA