Sanyo DSR-M804P manual Security Lock SET, Setting the user password

6SECURITY LOCK SET

3 Press the [ ] button.

The first password entry bar “-” flashes.

4 Press the [ ] and [ ] buttons to select the character to enter.

Example:

Selecting “1”

5 Press the [ ] button.

The second password entry bar flashes.

6 Repeat procedures 4 to 5 to enter the remaining digits (“23456AB” in this example).

zTo set a 4-digit password

When you have entered four digits, and the fifth password entry bar is flashing, press the [] button.

7 When you have entered the password, press the [ ] button.

The cursor moves to “OFF” (flashing).

8 Press the [ ] and [ ] buttons to select “ON”.

zIf you select “OFF” for the “ADMIN” setting, you cannot set the “USER” password.

9 When you have finished making the setting, press the [ ] button.

The cursor moves to “USER”.

If you do not want to set a user password, the password setting is now finished.

Press the [ ] and [ ]

button to move the cursor to “REC CONTROL”, to set the authorization for recording and playback operation. (JP. 44)

Setting the user password

Example: Setting “AB123456”

Perform Steps 1 and 2 on P. 42

3 Press the [ ] and [ ] buttons to move the cursor to “USER”.

4 Press the [ ] button.

The first password entry bar “-” flashes.

Example: A

Press the [ ] and [ ] buttons to select “A”.

5 Press the [ ] button.

The second password entry bar flashes. Press the [ ] and [ ] buttons to select “B”.

Use the procedures as “Administrator password” to set “123456.”

6 When you have finished making the setting, press the [ ] button.

The cursor moves to “OFF” (which flashes).

7 Press the [ ] and [ ] buttons to select “ON”, then press the [ ] button.

The cursor moves to “REC CONTROL”.

English 43