Sanyo DSR-M804P manual RS-485/NETWORK SET, Network connections and settings

Page 46

7RS-485/NETWORK SET

This section describes how to make the RS-485 terminal connections/settings needed to connect to an external device, and how to make the network connections needed to connect to a PC.

Network connections and settings

You can make digital video recorder menu settings and monitor images from a PC via a network (LAN). To do so, connect an Ethernet cable to the LAN terminal on the digital video recorder’s rear panel.

zTo connect a PC directly (Do not use an Ethernet hub.)

CCTV Camera

Cross-cable

PC

Settings for connecting to a PC or network

How to set the IP address

In the default setting, the IP address is set automatically by the PC.

To set the IP address manually, follow the procedures below.

[MENU] button [ ] button [ ] button

[ ] button [EXIT/OSD] button

1 Press the [MENU] button.

The [MENU] button lights, and the <MAIN MENU> screen is displayed.

2 Select “7. RS-485/NETWORK SET”, and press the [ ] button.

The <NETWORK SET> screen is displayed.

zTo connect to an intranet (Use an Ethernet hub.)

(1)

(3)

(2)

CCTV Camera

Straight-cable

SWITCHING HUB

PC

DVR

DVR PC

DVR

[Settings] (‹ indicates default setting.)

 

Item

Setting

Description

 

 

‹AUTO

Automatically set by the PC.

 

IP

 

 

(1)

 

You can set the last 3 digits

 

ADDRESS

MANUAL

between 1 and 250 from the

 

 

 

unit.

 

 

 

 

 

 

 

In “AUTO,” the address set by

(2)

ADDRESS

001 to 250

the PC is displayed.

(‹250)

In “MANUAL,” set the address

 

 

 

 

 

for each recorder connected.

 

 

 

 

(3)

DVR NAME

 

Set at the PC.

(Display only)

 

 

 

 

 

 

3 Press the [ ] and [ ] buttons to select the “IP ADDRESS” item, then press the [ ] button.

“AUTO” flashes.

English

45

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Page Location PrecautionService Avoiding Electrical Shock and FireIntroduction Contents Contents Settings OtherConditions to avoid Installation conditionsBefore USE Hard disk and cooling fan are expendable itemsBefore USE Names and Functions of Parts Front panelNames and Functions of Parts Rear panelBasic connections Installation and ConnectionsConnecting a remote control circuit System controller connectionsConnecting to a network Installation and ConnectionsConnecting cables to the control and alarm terminals Connecting the power cordOperation display area Displayed symbolsScreen Display and Position Example Normal screenTo display the quad screen as single screens Screen Display and PositionChanging the position of the operation display Press the QUAD/SEQUENCE buttonTo change the language Setting the LANGUAGE/CLOCKWhen you have made a selection, press the button Press the Menu buttonSetting the LANGUAGE/CLOCK Setting the timeTimer recording Normal RECORDING/TIMER RecordingNormal recording Set alarm recording Alarm RecordingAlarm recording When alarm input is detectedPlayback while fast-forwarding/rewinding PlaybackPress the PLAY/STOP button Frame advance reverse Normal RECORDING/TIMER Recording PlaybackViewing still images To playback audioSearching for Recorded Images Alarm searchCheck that Alarm Search is selected, and press the button Image to search Search in Search screenSearching for Recorded Images Date/time searchExample To search for the image from 26 October 2003 Press the button, and set the date/ time to searchPress the button to select VIEW, then press the button ViewSetting the key lock function Releasing the key lock functionDisplaying menu screens and setting screens Menu Configuration and OperationsTo restore menu setting items to their initial values Buzzer SET JP Menu Configuration and OperationsOverview of sub-menus RS-485/NETWORK SET JPLANGUAGE/CLOCK SET Summer Time settingsPress the or button to change the setting Select 1. LANGUAGE/CLOCK SET, and press the buttonWhen USE is selected for Mode under Summer Time EXT.CLOCK SET settingsLANGUAGE/CLOCK SET Switching HUB DVR Example 1 Displays screens in order of alarms Screen settingsScreen SET Menu Select 2. Screen SET MENU, and press the button Camera title settingScreen SET Menu Monitor SET Select 1. Monitor SET, and press the buttonSelect 2. Title SET, and press the button Setting the motion sensorScreen SET Menu No.1 No.2 No.3 No.4Select 3. Motion Sensor SET, and press the button Setting sensor operation positionsMoving the cursor Recorder Menu Setting itemsREC Mode SET Select 3. Recorder MENU, and press the buttonResetting when the Full indicator lights Recorder MenuRecorder Menu Alarm REC Mode SET OLY AL-RC on TMRAudio REC Level SET Timer recording settingsTimer setting items Select the channel and change sensitivitySelect 4. Timer REC SET and press the button Press the button onceSetting timer reservations spanning more than 24 hours Select 4. Timer REC SET, and press the buttonSet the end Week and Stop time. Switch SET to on Example Timer recording from 1030 Monday to 2030 WednesdayInitializing the hard disk/adding a hard disk Setting holidaysAfter entering the setting, press the button Select 5. Holiday SET, and press the buttonPress the or button to select HDD SET, then press the button Adding a hard disk 120 GB model onlyDisplay SET Display SET screen setting itemsSettings Select 4. Display SET, and pressBuzzer SET Buzzer SET screen setting itemsSelect 5. Buzzer SET, and press the button Setting passwords Password setting exampleSecurity Lock SET screen setting items Security Lock SETSetting the user password Security Lock SETSetting the security lock To check the security lock, press any buttonRS-485/NETWORK SET Network connections and settingsSettings for connecting to a PC or network Select 7. RS-485/NETWORK SET, and press the buttonRS-485A RS-485 connections and settingsRS-485/NETWORK SET RS-485BPower Power FAILURE/USED TimeSelect 8. Power FAILURE/USED TIME, and press the button DISK1 USEMenu UPLOAD/DOWNLOAD Select 9. Menu UPLOAD/ DOWNLOAD, and press the buttonTo upload menu items Menu UPLOAD/DOWNLOADTo download menu items Formatting CompactFlash cardsRS-485 specifications Interface SpecificationsRS-485 termination switch settings Interface Specifications DVR/VCR command tableSpecifications MPEG2Specifications Dimensions

DSR-M804P specifications

The Sanyo DSR-M804P is a versatile and efficient digital video recorder (DVR) designed specifically for professional applications, catering to a variety of surveillance needs. This compact unit stands out due to its robust features and advanced technologies, making it a reliable choice for monitoring and security.

One of the primary features of the DSR-M804P is its ability to support multiple video formats, including D1 resolution, which allows for high-quality video recording. The device can capture and store high-resolution images, ensuring that all details are clear and visible, which is essential for effective surveillance. The flexibility in video format support also facilitates integration with existing security systems, making it a suitable option for both new deployments and upgrades.

The DSR-M804P boasts real-time recording capabilities, allowing it to continuously capture video at high frame rates. This ensures that there are no gaps in surveillance footage, providing comprehensive coverage around the clock. Additionally, the DVR supports multi-channel inputs, enabling users to connect several cameras simultaneously. This feature is particularly beneficial in environments that require extensive monitoring, such as retail spaces, parking lots, or large facilities.

In terms of storage, the DSR-M804P is equipped with ample capacity, allowing for extended recording periods without the need for frequent manual intervention. The device supports various hard disk drive configurations, providing flexibility in storage options and ensuring that users can choose a setup that meets their specific requirements.

The user interface of the DSR-M804P is designed for ease of use, featuring intuitive controls that allow for simple navigation through settings and recorded footage. The system also includes options for remote access, enabling users to view live footage and recordings from virtually anywhere, which enhances the overall functionality and convenience of the device.

Another notable characteristic of the DSR-M804P is its compatibility with advanced technologies such as motion detection and alarm triggering. These features optimize surveillance by ensuring that only relevant footage is recorded, thus conserving storage space and making it easier to review critical events.

Overall, the Sanyo DSR-M804P is a highly capable digital video recorder that offers a blend of high-quality video capture, flexible storage options, and user-friendly operation, making it an ideal choice for various professional surveillance applications.
Top Page Image Contents