Sanyo PDP-42XR9DA Troubleshooting, Remote control does not operate, Double images

Page 36

Troubleshooting

If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area.

Before calling service, please check the symptoms and follow suggested solutions.

Remote Control

Problem

Remote control does not operate

Possible Solutions

!The batteries could be weak. Replace the batteries.

!Check the orientation of the batteries.

!Make sure the power cord is plugged in.

Video and Audio

Problem

Possible Solutions

No picture (screen not lit), No sound

!Make sure the power cord is plugged in.

!Press POWER on the TV or on the remote control.

!Try another channel; it could be station trouble.

Dark, poor or no picture (Screen lit), good sound

!Select a proper picture mode.

!Adjust the brightness in the video setting.

!Check the antenna connections.

	No color/dark picture/color	!	Adjust the color saturation in the video setting.
	is not correct	!	Adjust the color saturation in the video setting.
	is not correct

	Only snow and noise appear	!	Check the antenna connections.
	on the screen	!	Try another channel; it could be station trouble.

	Dotted lines or stripes	!	Adjust the antenna.
		! Move the TV away from noise sources such as cars, neon signs, or hair dryers.

	Double images	!	Using a highly directional outdoor antenna or a cable may solve the problem.

	Good picture, no sound	!	The sound may be muted. Press MUTE again to cancel.
		! Make sure the stereo mode is set to stereo or mono.

	Audio noise	!	Communication problems may occur if infrared communication equipment (e.g.,
			infrared cordless headphones) is used near the TV. Move the infrared
			communication equipment away from the TV until the noise is eliminated.

33

Image 36

Contents PDP TV Important Information Table of Contents Important Safety Precautions Important Safety Precautions To clean this unit, wipe with a soft, dry cloth Important NoticeDo not use in hot and cold rooms locations Using the Remote Control Installing the BatteriesPreparations Power Connection Antenna ConnectionIndicator/Remote Sensor CH+ PowerIdentification of Controls Main Unit front view/side viewMain Unit rear view Remote Control Unit Colored buttons RED/GREEN/YELLOW/BLUE DirectConnecting a Camcorder ConnectionsTV Side To playback CamcorderConnecting Component Video Connecting a ComputerConnecting an Hdmi device Connecting a VCR for RecordingHow to connect a device using Hdmi Connection To play from the device using HdmiConnecting Digital Coaxial Audio Connecting HeadphonesCoaxial audio cable Pdif in Coaxial Audio Processor TV Left SideBasic Operations Main Menu OverviewList of main menus to help you with operations To navigate through the OSD main menuTurning On/Off the Power First Time SetupTurning On Turning OffSelecting the Input Signal Source Displaying the Information BannerPress 3,4or OK to confirm the selection Memorizing the Channels Auto Channel SearchManual Searching for DTV programs Manual Fine Tuning Setting Audio SystemManual Searching for ATV programs Setting Favorite Channels Labeling ChannelsOpen the Programme Edit menu Channel List Management To skip unnecessary channelsTo sort channels To delete channelsChannel and Program Selection Picture Adjustment Customizing the PictureSound Adjustment Adjusting the VolumeAdjusting the Sound Using the volume buttons VOL+ and VOLStereo/Bilingual Selection for analog channels Audio Track Selection for digital channelsNicam Broadcast Selection IGR German stereo system BroadcastsSystem Setup System SetupSystem Update Time Hearing ImpairedRating and Lock Setup Password SetupBlock Program Setup To create a new passwordParental Guidance Setup DTV only Lock Tuning SetupRestoring Factory Default Timer Setup Current Time SetupOn Timer Setup Time Zone SelectionOff Timer Setup Sleep Timer SetupAuto Sleep Setup EPG Operation OpereationProgram’s information will be displayed Press Yellow button again to exitTeletext & Subtitle TeletextSubtitle Screen Setup for D-SUBPC Mode Screen SetupAuto adjust Such as position and phaseHotel Mode Setup Hotel Mode SetupHotel Mode Troubleshooting Remote control does not operateDouble images Current input mode One or some channels can’t beDisplayed Section Select them with 0-9 number buttonsSpecifications PDP TV5944035300 Ver