Sanyo PDP-42XR9DA One or some channels can’t be, Displayed Section, Current input mode

Page 37

Troubleshooting

General

Problem

Possible Solutions

One or some channels can’t be

! These channels may be locked. Please unlock them (see <Rating and Lock Setup>

displayed

section).

 

! These channels may be set skipped in the channel list. You may set it to not skipped or

 

select them with 0-9 number buttons.

 

 

Lost password

! You may use the super password (2580).

 

 

Some items can’t be accessed

! If a setting option appears in gray, this indicates that the settings option is unavailable

 

in current input mode.

 

 

TV cabinet creaks

! When the TV is in use, there is a natural rise in temperature, causing the cabinet to

 

expand or contract and may be accompanied by a slight creaking noise. This is not a

 

malfunction.

 

 

Some settings (such as volume setting, etc.)may not be memorized when the TV loses power or you press main Power Switch to turn off the TV.

!After you make some settings or adjustments, and within 30 seconds you turn off the TV by main Power Switch or the TV loses power, then the settings you have made within 30 seconds may not be memorized. But you can use Power button to switch the TV to standby mode before cutting off the power, then the settings can be memorized.

Control buttons do not operate

! Disconnect the power cord and wait for a few seconds. Then re-plug the power cord

 

and turn on the unit again.

 

 

Note

If your problem is not solved, turn your unit off and then on again.

Cautions:

Never attempt to repair a defective TV yourself.

34

Image 37
Contents PDP TV Important Information Table of Contents Important Safety Precautions Important Safety Precautions Important Notice To clean this unit, wipe with a soft, dry clothDo not use in hot and cold rooms locations Installing the Batteries Using the Remote ControlPreparations Antenna Connection Power ConnectionPower Indicator/Remote Sensor CH+Identification of Controls Main Unit front view/side viewMain Unit rear view Colored buttons RED/GREEN/YELLOW/BLUE Direct Remote Control UnitConnections Connecting a CamcorderTV Side To playback CamcorderConnecting a Computer Connecting Component VideoConnecting a VCR for Recording Connecting an Hdmi deviceHow to connect a device using Hdmi Connection To play from the device using HdmiConnecting Headphones Connecting Digital Coaxial AudioCoaxial audio cable Pdif in Coaxial Audio Processor TV Left SideMain Menu Overview Basic OperationsList of main menus to help you with operations To navigate through the OSD main menuFirst Time Setup Turning On/Off the PowerTurning On Turning OffDisplaying the Information Banner Selecting the Input Signal SourcePress 3,4or OK to confirm the selection Auto Channel Search Memorizing the ChannelsManual Searching for DTV programs Setting Audio System Manual Fine TuningManual Searching for ATV programs Labeling Channels Setting Favorite ChannelsOpen the Programme Edit menu To skip unnecessary channels Channel List ManagementTo sort channels To delete channelsChannel and Program Selection Customizing the Picture Picture AdjustmentAdjusting the Volume Sound AdjustmentAdjusting the Sound Using the volume buttons VOL+ and VOLAudio Track Selection for digital channels Stereo/Bilingual Selection for analog channelsNicam Broadcast Selection IGR German stereo system BroadcastsSystem Setup System SetupSystem Update Time Hearing ImpairedPassword Setup Rating and Lock SetupBlock Program Setup To create a new passwordLock Tuning Setup Parental Guidance Setup DTV onlyRestoring Factory Default Current Time Setup Timer SetupOn Timer Setup Time Zone SelectionSleep Timer Setup Off Timer SetupAuto Sleep Setup Opereation EPG OperationProgram’s information will be displayed Press Yellow button again to exitTeletext Teletext & SubtitleSubtitle Screen Setup Screen Setup for D-SUBPC ModeAuto adjust Such as position and phaseHotel Mode Setup Hotel Mode SetupHotel Mode Remote control does not operate TroubleshootingDouble images One or some channels can’t be Current input modeDisplayed Section Select them with 0-9 number buttonsPDP TV Specifications5944035300 Ver