Sanyo DP55441 manual Initial setup, Initial Channel Scan

GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH

POWER CONNECTION

5 Plug in AC power cord

(120V AC, 60Hz)

6 Press the POWER button, (Follow the on-screen instructions).

To 120V AC outlet.

INITIAL setup

7 Use the CURSOR ▲ and ▼ buttons to highlight Store or Home. Press the OK button. TVs will enter INITIAL CHANNEL SCAN automatically.

Store : This mode is for the retail display setup.

Home : This mode qualifies for ENERGY STAR.

Move OK Enter

INITIAL CHANNEL SCAN

NOTE : Skip the following process if there is no cable or antenna being plugged-in to tuner connector.

8 Use the CURSOR ▲ and ▼ buttons to highlight the Channel Scan. Press the OK button. Choose the Scan to start the channel scanning. The scanned channels are stored in Channel List and can be scanned using the CURSOR ▲ and ▼ buttons.

English

11