INSTALLING AND UNINSTALLING STAND
CAUTION INSTALLING STAND
•When holding (moving or lifting) the LCD Display, hold the display’s body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage.
•Before installing, provide a desk (or a part of it) which is strong enough to support the weight of the LCD TV and its stand. The desk must be larger than the LCD Display's screen size. The desk's surface must be flat and covered with soft material (such as a blanket) for protecting the screen surface.
•Before putting the LCD Display on the desk, make sure there is no object on it. Leaving any object under the screen may cause damage on the screen.
•The LCD TV with this stand should be installed on a flat and level place. Do not place it on non flat, unlevel or unstable cart or stand. The display may fall, causing not only serious damage to the products but serious injury to a person.
SAFETY NOTE
For correct installing, mounting and uninstalling of the LCD TV Stand, it is strongly recommended to use a trained, authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to the installer.
Installing Stand (55")
1 Place the LCD TV on a flat surface place where | 2 Secure the stand to the TV with 4 screws. |
maintained with soft materials (such as a blanket) for protecting the display screen.
| 3 |
|
|
1 | 2 | 4 |
|
|
| ||
Uninstalling Stand (55") |
|
|
|
1 Place the LCD TV screen facing down on a flat | 2 Remove screws in 4 holes with screw driver. | ||
surface with soft materials (such as a blanket) for |
| ||
protecting the display screen. |
|
|
|
3
1 2 4
English
5