Sanyo DP50710 manual Clock Timer, Light Sensor, Panel Protection

ON-SCREEN MENU OPERATION SETUP ______________________

Clock Timer

This feature allows you to set a Current Time for your HDTV and enable a Switch On Time for the HDTV to turn on at a specific time of day.

When On Timer Function is set to ON, the TV will automatically turn on at the previously set Switch on Time.

Light Sensor

This feature detects ambient room light brightness and uses that reading to control the panel brightness level and picture parameters to reduce the HDTV’s power consumption.

NOTE: When room lighting is dark, the panel brightness and/or the picture setting parameters such as bright- ness and contrast are lowered. When room lighting is bright, parameters are affected opposite.

Panel Protection

Displaying a still picture for a long time may cause an “afterimage” or “ghost” on the screen. To help avoid this situation, use the Picture Rotation function.

If an afterimage occurs, use the White Pattern feature immediately to repair the panel. The more severe the afterimage, the longer the curing process may take. The default on-time for White Pattern is 30 minutes.

NOTE: The sooner you remove a still picture and activate White Pattern, the more likely it is that the panel can be repaired.

Exit the White Pattern blank screen by pressing any button on the remote control (except VOLUME, AUDIO or MUTE)

CLOCK TIMER SCREEN

LIGHT SENSOR SCREEN

PANEL PROTECTION SCREEN