Sanyo DP32D13 manual Getting Started, Install Batteries in the Remote Control

Page 7

Getting Started

Install Batteries in the Remote Control

1.Open the battery cover of the remote control by pressing down and pulling it.

2.Insert two new AAA size batteries for the remote control. Make sure to match the

and signs on the batteries with marks inside the remote control.

Operating Range of the Remote

Control

Point the top of the remote control toward the TV’s sensor within a distance of less than 6m/20ft, and a horizontal/vertical angle of less than 30 degrees.

The remote control may not function properly if the TV's sensor is under direct sunlight or strong illumination, or when there is obstacle in the path of signal transmission.

30

30

ENGLISH

3. Close the battery cover until it clicks shut.

•• Do not use rechargeables together with dry cells, other types, mixed new and old or batteries with different charge levels.

•• Do not expose the remote control or batteries to moisture or heat such as sunshine.

•• Please recycle used up batteries.

•• Remove the batteries if the remote control is not going to be used for an extended period of time.

•• Danger of explosion if batteries are incorrectly replaced.

•• Replace batteries only with the same or equivalent type.

Need help?

www.sanyoctv.com

1-800-877-5032

Antenna Connection for Off-air Signals.

The tuner in this LCD TV can receive digital and analog off-air signals from an antenna, or analog or clear QAM cable channels from a direct Cable TV connection.

ANALOG/DIGITAL

ANTENNA IN

ANTENNA

or

CABLE

NOTES:

•• You must use the On-screen Menu to Search for Clear QAM Cable channels. (see p.14)

•• For the best picture, connect your Cable box or Satellite receiver to HDMI or component jacks.

•• This LCD TV can receive ANT unscrambled RF signal being broadcasted.

7

Image 7
Contents 32 LED Do not Open Important Safety InstructionsEnergy Star User Information Handling PrecautionsFCC Information Canadian NoticeContents Accessories InstallationPositioning the TV Wall Mounting Optional Installing StandScrew type Getting Started Install Batteries in the Remote ControlOperating Range of the Remote Control Antenna Connection for Off-air SignalsVOL Controls and JacksHdmi HDMI1/DVI, HDMI2, HDMI3 Connect your Hdmi devices Volume UP / Down VOL Wireless Remote ControlHdmi to Hdmi Connection ConnectionComponent YPbPr Connection DVI to Hdmi Connection Video Connection Shared With Component-YPC Connection Digital Audio ConnectionPower Connection Initial SetupUSB Connection Press Enter button to start the channel scan Video Menu OSD Menu OperationAudio Menu Channels Menu ‰‰ Parental Controls Setup Menu‰‰ Demo Mode ‰‰ Menu LanguageTo control while in photo slideshow Photos MenuTo control while in photo folder To control while in full-screen photo showProblems and Solutions Specifications Supported Timing Table ResolutionFreq. KHz Clock MHz For customer assistance, call toll free ONE-YEAR Limited Parts and Labor WarrantySanyo Manufacturing Corp Sanyo Road, Forrest City, AR