Sanyo DP32649 owner manual PC Connections and Setup, PC Setting

PC CONNECTIONS AND SETUP

NOTE: Before connecting any cables, disconnect the AC power cords of both the HDTV and PC from the AC outlets.

NOTE: Power on the HDTV and any other peripheral equipment before powering on the computer.

To avoid an “Out of Range” condition please set your PC’s output resolution to one compatible with your HDTV. See page 3.

NOTE:If computer has only DVI Output, a DVI to RGB

converter will be required (not included.)

RGB OUTPUT DVI OUTPUT

JACKJACK

Stereo mini audio cable

PC Setting

Auto Adjustment – Automatically adjust display position, dot clock and phase.

Dot Clock – Adjust the Dot frequency to match your computer’s Dot frequency.

Phase – Adjust this parameter when the picture appears to flicker or is blurred.

H-Position – Move the image horizontally

V-Position – Move the image vertically

Power Saving – Enable the HDTV to turn to Standby Mode when computer is not in use.

		PC OR LAPTOP
RGB Monitor
cable	Sanyo recommends using a		PC SETTING SCREEN
	monitor cable that includes a
HDTV BACK	Ferrite Core.

PC Picture

Standard – Sets predetermined values to the Picture parameters.

Manual – Adjust the screen’s Contrast, Brightness and Color Temperature settings.

PC Sound

Standard – Sets predetermined values to the Sound parameters.

Manual – Adjust the HDTV’s Bass and Treble settings.

PC PICTURE (MANUAL) SCREEN

NOTE: These settings do not affect normal TV viewing.

PC SOUND (MANUAL) SCREEN

NOTE: These settings do not affect normal TV viewing.

Need help? www.sanyoctv.com 1-800-877-50327