15
❒Connecting To the Rear AV1 Input Jacks (Continued)
■When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1. Whenever the TV/AV button is pressed, the mode will change as follows:
28 | AV1 | AV1(DVD) | AV2 |
TV mode |
|
| (Optional |
|
|
| model) |
■You can select a TV programme while watching a playback from a VCR For example:
●To select programme position “9” while watching a playback from external VCR, press “9” button of the remote control. The TV set returns to the TV mode and programme “9” will be selected.
●To select the programme position “26”, press Digit
Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will return the TV to the TV mode.
❒Selecting the Colour System in AV Mode
Depending on the type of video tape or connected AV equipment being used, it may be necessary to select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
AV1
PAL
AV1
NTSC
AV1
NTSC 4.43
Colour system setting for AV position is automatically stored in the memory.
❒Connecting To a DVD Player with AV1(DVD) Video Component Input Terminal (Y, Cb or Cr)
Connect the component output terminal on your DVD player to the component video input terminal of this product. (NOTE: When a sig- nal of Y,Cb,Cr/Y,Pb,Pr is received, the output signal from monitor output terminal will be cor- responding but without colour (black and white image).)
■To watch a program in this connection status, select AV1(DVD).
| INPUT | MONITOR OUT |
AV1/DVD |
| |
CR | R | R |
To Input Terminal CR | (MONO) | To Audio |
| ||
CB | L | L |
To Input Terminal CB |
| To Audio |
|
| |
Y |
| V |
To Input Terminal Y |
| I |
VIDEO | D | |
|
| E |
O
28 | AV1 | AV1(DVD) | AV2 |
(TV mode) |
|
| (Optional |
|
|
| model) |
■ Make sure the component video terminal (Y, Cb or Cr)
is connected correctly.
Video/DVD Player