Sanyo CA21KS2, CA21YS2S, CP21XS2S Connecting To the Front AV2 Input Jacks Optional Model, Selector

16

❒ Connecting To the Front AV2 Input Jacks (Optional Model)

Input (AV2)	Input-L (AV2)	Input-R (AV2)
To Video	To Audio	To Audio

It is convenient to use the AV input jack on the front panel for equipment that is often connected and disconnected.

■ To watch the Front AV2 video
input picture, select AV2
	AV2
position by pressing the TV/AV
Selector.

Video/DVD Player

*Model CA21SF1, CP21SF1 are not equipped with Front AV2 input terminal.

❒ Connecting To the Monitor Output Jacks

	INPUT	MONITOR OUT
AV1/DVD
CR	R	R
	(MONO)		To Audio Output-R
CB	L	L
			To Audio Output-L
Y		V
		I
	VIDEO	D	To Video Output
		E
		O

To video and audio inputs

The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dub- bing from AV1 or AV2 input terminals.

■To record TV programme, select TV mode by pressing the TV/AV Selector and record the desired programme.

15 TV mode

■To dub video from the AV1 terminal input, select AV1 position and by pressing the TV/AV Selector.

VCR for Recording AV1

❒AV Connection To the Aerial Socket

The AV apparatus can also be connected to the aerial socket of your TV receiver.

Presetting to watch the video input

PLAYBACK

1.Playback the VCR .

2. Tune a VCR playback in programme position
that you want. (See Semi-Auto Tuning and		VCR for
Manual Tuning on pages 11.)
	Aerial Socket	playback

For further details concerning this connection and adjustment, refer to the operating instructions for the AV equipment.