Salton GR80B owner manual Using Wire Rack for Baking, Using Wire Rack with Skewers

Using Wire Rack for Baking

NOTE: Do not use the Wire Rack at the same time as the Rotisserie Bar.

1.Use the Cover Handles to lift open the Cover.

2.The Wire Rack can be used in the upper or lower positions. See Figure 10.

NOTE: These instructions are for using the Wire Rack for Baking. When using the Wire Rack with Skewers, see "Using Wire Rack with Skewers" below.

UPPER

POSITION

LOWER

POSITION

H M

Place Wire Rack into Rotisserie Oven at desired level. Be sure

the two cross wires are on the bottom.

3. Use Cover Handles to close Cover.

Using Wire Rack with Skewers

NOTE: Use Skewers with the Wire
Rack only. Do not attempt to use
Skewers any other way.
1. Use the Cover Handles to lift
open the Cover.
2. Hold Wire Rack upside down (so
two cross wires are on top).	LOWER
Arrange Wire Rack so cross wire	POSITION
closest to end will go into the
Rotisserie Oven first (it will be
toward the back). Place Wire
Rack into oven at lower position
as shown in Figure 11. Be sure
Rack is on both front and back
parts of ledge.

Figure 10

H M

Figure 11

3.Cut food into 1 to 1-1/2 inch pieces. Slide food pieces onto pointed end of Skewer. Repeat for each desired skewer.

4.Place each Skewer into "dip" in cross wire as shown. The point- ed end of the Skewer will “rest” on the back cross wire of the Wire Rack.

5.Use Cover Handles to close Cover.

19