Using the components
Special bodypack transmitter/wireless microphone settings
The following special settings can only be made via the bodypack transmitter's/wireless microphone's operating menu. An overview of this operating menu is given from page 43 onwards.
Switching the bodypack transmitter's line input on/off
You can connect an audio source, such as a CD player, MP3 player, etc. to the transmitter's line input. If you have connected an audio source, you then have to switch on the line input as follows:
Press the SET button .
The operating menu appears. The first menu item “CHAN” flashes.
Repeatedly press the / rocker button in the direction until “LINE” flashes on the display.
Press the SET button .
If the line input is switched off, “LINE.OFF” flashes
on the display; if the | line input is switched on |
“LINE.ON” flashes on the display. | |
Press the / rocker | button to change the |
setting. |
|
Press the SET button | to permanently store the |
setting. |
|
“STORED” briefly appears on the display.
Adjust the sensitivity of the line input to match the connected audio source, as described in the following section.
Changing the sensitivity of the line input on the bodypack transmitter
To adjust the sensitivity of the line input to match the connected audio source:
Make sure that the line input is switched on (see previous section).
36