Putting the components into operation
Inserting/Changing batteries or accupack in the wireless microphone
For powering the wireless microphone, only use either the rechargeable BA 2015 accupack or two 1.5 V AA size batteries.
Unscrew the display unit in the direction of the arrow (counterclockwise) on the handle of the wireless microphone .
Pull out the display unit fully.
Open the cover of the battery compartment.
Insert the batteries or the BA 2015 accupack as indicated on the compartment. Please observe correct polarity when inserting the batteries/ accupack.
Close the cover .
Push the battery compartment into the handle of the wireless microphone.
Screw the display unit on again.
Note:
Always charge the accupack in the charging compartment of the charging case (see “Charging the BA 2015 accupack” on page 30).
23