6
Using the components
Press | / to change the channel. |
|
| ||
If you | press , the | display | jumps | to the | next |
channel; if you press | , the display jumps to the | ||||
previous channel. |
|
|
|
| |
By pressing and holding the | / | buttons, | the | ||
display cycles continuously (repeat function). |
|
Press the SET button to permanently store the selected channel.
“STORED” appears briefly in the display. The bodypack transmitter or the wireless microphone is now transmitting on the selected channel. The last menu selected is shown.
To exit the operating menu:
Use / to select the menu item “EXIT” and press the SET button.
The standard display is shown.
Or:
Press and hold the ON/OFF button until the standard display is shown.
Setting the receiver channel
In order for the receiver to receive the signal from the bodypack transmitter or the wireless microphone, it has to be set to the same channel.
To manually set the receiver channel: |
| |||
Press | the | / rocker button | for channel | |
selection. |
|
|
| |
The channel changes. The selected channel is | ||||
shown on the channel display . |
| |||
If the bodypack transmitter is transmitting on this | ||||
channel, the RF signal indication | indicates the | |||
field strength of the received RF signal. | ||||
Notes: |
|
|
|
|
y By pressing and holding the | / | rocker button | ||
for | channel | selection , | the | display cycles |
continuously (repeat function).
yAfter channel 6, the display will return to channel 1.
33