Using the components
shows full deflection during the loudest passages,
but the yellow LED PEAK | never lights up. |
Press the SET button | to permanently store the |
setting.
“STORED” briefly appears on the display. The sensitivity of the microphone input is now stored.
Adjusting the input sensitivity on the wireless microphone
The input sensitivity is set too high if overmodulation occurs when speaking loudly or close to the microphone. The audio level display (AF) shows full deflection in the event of overmodulation.
On the other hand, if the input sensitivity is set too low, the modulation will be too weak. This will cause a noisy signal.
The input sensitivity is set correctly when the audio level display (AF) only shows full deflection during the loudest passages.
|
38
To set the wireless microphone modulation:
Press the SET button .
The operating menu appears. The first menu item “CHAN” flashes.
Repeatedly press the / buttons / until “SENSIT” flashes on the display and the audio level appears.
Press the SET button .
The current input sensitivity and the audio level appear on the display.
Press the / buttons / | to change the setting |
so that the audio level | shows full deflection |
during the loudest passages. | |
Press the SET button | to permanently store the |
setting.
“STORED” briefly appears on the display. The wireless microphone modulation is stored.
As a rough preset, set the wireless microphone to:
yPresenting:
yInterview:
