CH 03
LINE
MIC
CH 03
LINE
MIC
Using the components
Connect the external audio source, switch it on and start playback.
Press the SET button .
The operating menu appears. The first menu item “CHAN” flashes.
Repeatedly press the / rocker button until
“SENSIT” flashes on the display and the LINE level | |
display | appears. |
Press the SET button . | |
The current input sensitivity and the LINE level | |
display | appear on the display. |
Press | the / rocker button | to change the |
input | sensitivity so that the LINE level display |
shows full deflection during the loudest passages,
but the yellow LED PEAK | never lights up. |
Press the SET button | to permanently store the |
setting. |
|
“STORED” briefly appears on the display. The sensitivity of the line input is now stored.
Changing the sensitivity of the microphone input on the bodypack transmitter
To adjust the sensitivity of the microphone input to match the connected microphone:
Connect the microphone, position it correctly (refer to the microphone's operating manual) and speak into the microphone as usual.
Press the SET button .
The operating menu appears. The first menu item “CHAN” flashes.
Repeatedly press the / rocker button until “SENSIT” flashes on the display and the MIC level display appears.
Press the SET button .
The current input sensitivity and the MIC level display appear on the display.
Press the / rocker button to change the input sensitivity so that the MIC level display
37