Sanyo CE42FD81-B instruction manual Menu System, Picture Menu, Sound Menu

It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broad- casting.

Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel com- pany, then insert those to the Television using the following procedure.

1.Switch off the TV and unplug from the mains.

2.Insert the CAM, then Viewing Card to the slot that is located in the terminal cover at the left-hand side of the TV (from front view).

•The CAM should be correctly inserted, it is impos- sible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

3.Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.

•Some CAMs may require the following set up. Please set the CAM by entering the IDTV menu, Common Interface then pressing the “OK(SELECT) ” button. (CAM set up menu is not displayed when it is not required.)

•To see the viewing contract information:

Enter IDTV; press the “M” button, then highlight Com- mon Interface and press the “OK(SELECT)” button.

•When no module is inserted, “No Common Inter- face module detected” message appears on the screen.

•Refer to the module instruction manual for details of the settings.

Menu System

Picture Menu

PICTURE

Mode

By pressing  /  button, select Mode. Press /  button to choose from one of these options: Cinema, Dynamic and Natural.

Contrast/Brightness/Sharpness/Colour/Hue

By pressing  /  button, select the desired Option. Press  /  button to set the level.

Hint: Hue is displayed in picture menu when the TV receives an NTSC signal.

Colour Temp

•By pressing  /  button select Colour Temp.

•Press  /  to choose from one of these options: Cool, Normal and Warm.

Noise Reduction

By pressing  /  button select Noise Reduction.

Press  /  to choose from one of these options: Low, Medium, High or Off.

Film Mode

Films are recorded at a different number offrames per second to normal television programmes.

By pressing  /  button, select Film Mode.

Press  /  button to set this feature On or Off. Turn this feature on when you are watchingfilms to see the fast motion scenes clearly.

Store

•By pressing  /  button select Store.

•Press  or “OK” button to store the adjustments. “Stored” will be displayed on the screen.

Reset

By pressing  /  button, select Reset. Press  /  or “OK” button to reset the picture modes to factory default settings.

Mode

Contrast

Brightness

Sharpness

Colour

Colour Temp Noise Reduction

Film Mode

Store

Reset

Dynamic 63 63 31

99

Normal

Low

Off

Sound Menu

NO SIGNAL