11. Disconnect Device
The mains plug is used to disconnect TV set from the mains and therefore it shall remain readily operable.
12.Excessive sound pressure from earphones and headphones can cause hearing loss.
13.To prevent injury, this device must be securely
attached to the wall in accordance with the installa- tion instructions when mounted to the wall (if the option is available).
Warning: To prevent injury, this device must be se- curely attached to the floor/wall in accordance with the installation instrutions.
“The LCD panel is very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few
“DO NOT LEAVE YOUR TV ON
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
•After unpacking, allow the TV set to reach the ambi- ent room temperature before you connect the set to the mains.
Connections To The Aerial Input Socket
•Connect the aerial or cable TV plug to the Aerial input socket located at the rear of the TV and connect the cable plug coming out from the TV out socket lo- cated on the devices (VCR, DVB etc.) to this socket as well.
75
VHF/UHF
CABLE TV
REAR OF THE TV
Inserting Batteries In The Remote Control Handset
WARNING : Remote control is battery included. A plas- tic protector is used to disconnect the batteries in order to prevent the battery life from reducing. Please remove the plastic protector before the first use.
•Remove the battery cover located on the back of the handset by gently pulling backwards from the indi- cated part.
•Insert two AAA/R3 or equivalent type batteries in- side. Place the batteries in the right directions and replace the battery cover.
NOTE: Remove the battery from remote control hand- set when it is not to be used for a long period. Otherwise it can be damaged due to any leak- age of battery.
English - 4 -