Basic Operations

After Automatic Search process is completed, the following message asking for analogue channel search appears on the screen. TV switches to the analogue TV mode.

Do you want to search for analogue channels?

Yes		No

To seach for analogue channels, select “Yes”. The menu below is displayed to search for analogue chan- nels.

AUTO PROGRAM

LanguageEnglish

CountryGermany

Text language

West

Select your Language, Country and Text language by

using  /  and  /  buttons. Press “OK” button to continue. To cancel, press “BLUE” button.

For more information on this process, see “Install Menu” section.

Note: For proper functioning of digital teletext in DTV mode, you should set country as UK in ana- logue AUTO PROGRAM.

You can operate your TV using both the remote control and onset buttons.

Operation with the buttons on the TV

Volume Setting

•Press “-” button to decrease volume or “ +” button to increase volume, so a volume level scale (slider) will be displayed at the middle of the bottom on the screen.

Programme Selection

•Press “P/CH +” button to select the next programme or “P/CH -” button to select the previous programme.

Entering Main Menu

•Press the “MENU” button to enter Main menu. In the Main menu select sub-menu using “P/CH -” or “P/CH

+” buttons and enter the sub-menu using “ -” or

“ +” buttons. To learn the usage of the menus, refer to the Menu System sections.

AV Mode

Press the “ AV ” button at the control panel on the the TV to switch your TV to AV modes.

Operation with Remote Control

The remote control of your TV is designed to control all the functions of the model you selected. The func- tions will be described in accordance with the menu system of your TV.

Functions of the menu system are described in the following sections.

Volume Setting

Press “ V +“ button to increase volume. Press “ V -” button to decrease volume. A volume level scale (slider) will be displayed in the middle at the bottom of the screen.

Programme Selection (Previous or next programme)

•Press “P-” button to select the previous programme.

•Press “P+” button to select the next programme.

Programme Selection (direct access):

Press digit buttons on the remote control to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 999 (for IDTV) or 10-99 (for analogue), press the digit buttons consecutively which programme you want to select (eg. for programme 27, first press 2 and then 7). When it is late to press second digit button only the first digit programme will be displayed. The limit of the delay time is 3 seconds.

English - 6 -