Language, TV Setup, Common Interface | Sanyo CE42FD81-B manual

• To set an event, highlight its mode button using the

or button and press the “OK(SELECT)” button to display the timer entry window.


Name:	3. ITV 1
Start:	00:00
End:	00:00
Date:	03/06/2005
Mode:	Once

•Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the or buttons.

•The channel name is set using the or button to display the channel which broadcasts the programme.

•The start time, end time and date are each set with the digit buttons on the remote control in 24-hour format.

•The frequency mode determines how often the re- ceiver operates this event and is set with the or

button to be either Once, Daily, or Weekly.

If an invalid number for the start or end times or the date is entered, “Entered time is not valid” message appears on the menu.

If timer action occurs while the TV is watched, the TV switches to the selected channel. When timer ex- pires, the TV switches to the channel which it is switched from.

Selected digital channel will be output via Scart-2. You should connect your VCR to Scart-2 for record- ing digital broadcast.

Language

Some programmes are broadcast in two or more lan- guages simultaneously. The language heard can be selected from the Language Menu.

•Press the “M” button to display the Main Menu and

use or button to highlight the Language line and press the “OK(SELECT) ” button.

Main Menu

Channel List

Installation

Configuration

Timers

Language

TV Setup

Common Interface

•Use the or button to highlight the soundtrack language required and press the “OK(SELECT)” but- ton. Normal viewing, with the required language soundtrack, can be resumed by pressing the “M” button.