Sanyo AVP504 Antenna Connection, Power Connection, Wall Antenna Socket RF Coaxial Cable75 ohm

Page 10

Preparations (Continued)

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that a connection for cable system, satellite service or an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area.

TV REAR

Wall Antenna Socket

RF Coaxial Cable(75 ohm)

Note

=It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.

=75-ohm cable should not be bundled with the power cord and the like. =If an antenna is not installed properly, contact your dealer for assistance.

Power Connection

Household power outlet

AC cord

1.Connecting the female plug to the AC socket on the unit.

2.Connecting the male plug to the wall outlet as illustrated.

Note

=This illustration is for reference only. The AC plug may be different on different models.

=This product should be operated only from the type of power source indicated on the marking label. =Always unplug the AC cord from power outlet when not using for a long period of time.

8

Image 10

Contents AVP4232 AVL472 AVP504 Full HD LCDTable of Contents Important Information Or MoistureImportant Safety Precautions Important Safety Precautions Important Safety Precautions Important Notice If the cabinet becomes dirty, wipe it with a soft, dry clothRemoving the Stand if wall mounting PreparationsLoosen the screws on Stand to remove the Stand Using the Remote Control Installing the BatteriesAntenna Connection Power ConnectionWall Antenna Socket RF Coaxial Cable75 ohm Model AVP4232/AVP504 Identification of ControlsMain Unit front view/side view Model AVL472Main Unit rear panel Model AVP4232/AVP504Model AVL472 Remote Control Unit Connections Connecting a VCRHow to connect To play VCRHow to connect a device using Hdmi Connection Connecting a CamcorderConnecting an Hdmi device To play from the device using HdmiTo connect a device using component video Connecting Component VideoConnecting a Computer To play component video from an external deviceConnecting Headphones Connecting a VCR for RecordingConnecting Digital Optical Audio To record programBasic Operations Turning the Power On/OffSelecting the Input Signal Source On-Screen Menu Language SelectionList of main menus to help you with operations To navigate through the main menuMonitoring DTV Signal Strength Setting the AIR/CABLE OptionAuto Channel Search Memorizing the Channels Setting Favorite ChannelsChannel Label Setup To Skip Unwanted Channels+ Method 4 Using the Channel List or Favorite List + Method 1 Using the Channel up/down buttons CH+ or CH+ Method 3 Using the Recall button Channel selectionPicture Adjustment Adjusting the PictureAdjusting the Sound Sound AdjustmentAdjusting the Volume Stereo/SAP Broadcasts Setup Only for analog receptionSystem Setup System SetupSetting up Closed Captioning Closed Captioning SetupSleep Timer Clock and Timer SetupAuto Clock Setup To turn off sleep timer, select OffTo set a password Setting Parental LockTo Enable Parental Lock Rating Setup To Adjust the PC Image Image Adjustments for Vgapc ModeTo Setup PC Advanced Setting Remote control does not operate TroubleshootingDouble images Current input mode Lost passwordSome items can’t be accessed One or some channels can’t beSpecifications NTSC-M, AtscSanyo Comfort Warranty