Sanyo AVL472, AVP4232, AVP504 Troubleshooting, Remote control does not operate, Double images

Page 32

Troubleshooting

If, after reading these operating instructions, you have additional questions related to the use of your television, please call our toll-free help line at 1-800-263-2244.

Before calling service, please check the symptoms and follow suggested solutions.

Remote Control

Problem

Remote control does not operate

Possible Solutions

!The batteries could be weak. Replace the batteries.

!Check the orientation of the batteries.

!Make sure the power cord is plugged in.

Video and Audio

Problem

Possible Solutions

No picture (screen not lit), No sound

!Make sure the power cord is plugged in.

!Press POWER on the TV or on the remote control.

!Try another channel; it could be station trouble.

Dark, poor or no picture (Screen lit), good sound

!Adjust the brightness in the video setting.

!Check the antenna/cable connections.

!If on computer (VGA) mode, check that the computer's refresh rate on its display or monitor menu is maximum 60Hz and 1280 x 768 resolution.

No color/dark picture/color

is not correct

! Adjust the color saturation in the video setting.

 

 

 

Only snow and noise appear

! Check the antenna/cable connections.

on the screen

! Try another channel; it could be station trouble.

 

 

Dotted lines or stripes

! Adjust the antenna.

 

! Move the TV away from noise sources such as cars, neon signs, or hair dryers.

 

 

Double images

! Using a highly directional outdoor antenna or a cable may solve the problem.

 

 

Good picture, no sound

! The sound may be muted. Press MUTE again to cancel.

 

! Make sure the stereo mode is set to stereo or mono.

 

 

Audio noise

! Communication problems may occur if infrared communication equipment (e.g.,

 

infrared cordless headphones) is used near the TV. Move the infrared

 

communication equipment away from the TV until the noise is eliminated.

 

 

30

Image 32
Contents AVP4232 AVL472 AVP504 Full HD LCDTable of Contents Important Information Or MoistureImportant Safety Precautions Important Safety Precautions Important Safety Precautions Important Notice If the cabinet becomes dirty, wipe it with a soft, dry clothLoosen the screws on Stand to remove the Stand PreparationsRemoving the Stand if wall mounting Using the Remote Control Installing the BatteriesWall Antenna Socket RF Coaxial Cable75 ohm Power ConnectionAntenna Connection Identification of Controls Main Unit front view/side viewModel AVP4232/AVP504 Model AVL472Main Unit rear panel Model AVP4232/AVP504Model AVL472 Remote Control Unit Connecting a VCR How to connectConnections To play VCRConnecting a Camcorder Connecting an Hdmi deviceHow to connect a device using Hdmi Connection To play from the device using HdmiConnecting Component Video Connecting a ComputerTo connect a device using component video To play component video from an external deviceConnecting a VCR for Recording Connecting Digital Optical AudioConnecting Headphones To record programTurning the Power On/Off Selecting the Input Signal SourceBasic Operations On-Screen Menu Language SelectionList of main menus to help you with operations To navigate through the main menuAuto Channel Search Setting the AIR/CABLE OptionMonitoring DTV Signal Strength Setting Favorite Channels Channel Label SetupMemorizing the Channels To Skip Unwanted Channels+ Method 1 Using the Channel up/down buttons CH+ or CH + Method 3 Using the Recall button+ Method 4 Using the Channel List or Favorite List Channel selectionPicture Adjustment Adjusting the PictureSound Adjustment Adjusting the VolumeAdjusting the Sound Stereo/SAP Broadcasts Setup Only for analog receptionSystem Setup System SetupSetting up Closed Captioning Closed Captioning SetupClock and Timer Setup Auto Clock SetupSleep Timer To turn off sleep timer, select OffTo Enable Parental Lock Setting Parental LockTo set a password Rating Setup To Setup PC Advanced Setting Image Adjustments for Vgapc ModeTo Adjust the PC Image Double images TroubleshootingRemote control does not operate Lost password Some items can’t be accessedCurrent input mode One or some channels can’t beSpecifications NTSC-M, AtscSanyo Comfort Warranty