Sanyo AVP4232, AVP504, AVL472 Connections, Connecting a VCR, How to connect, To play VCR

Connections

Cautions Before Connecting

Carefully check the terminals for position and type before making any connections.

The illustration of the external equipment may be different depending on your model.

Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.

Refer to the operating manual of the external device as well.

When connecting an external device, turn the power off to avoid any issues.

Connecting a VCR

TV REAR

VCR

S-VIDEO

Cables are often color-coded

AV cable

to connectors. Connect red to

red, white to white, etc.

S-VIDEO cable

How to connect:

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.

Note: For better video, you can use the S-video terminal if your source supports it.

To play VCR

1.Turn on your TV, then press INPUT button. The INPUT SOURCE menu opens.

2.Press 5or6to select AV1(or S-Videoif using S-VIDEO terminal), then press ENTER to confirm.

(Or you can press VIDEO button on the remote control to go to AV1 mode directly. Press the VIDEO button a third time to go to S-Videomode.)

3. Turn on your VCR , insert a videotape and press the Play button.

Note

The S-VIDEO terminal shares the same audio jacks with VIDEO1.

13