How to Add a Channel to a Favourites List
•By pressing “
” or “
” buttons, highlight the channel that you want to add to the favourite list.
•By pressing OK button, the highlighted channel is added to the Favourite List.
•F icon indicates that a channel is added to Favourite List.
Removing a Channel from Favourite List
•Highlight the channel that you want to remove from the favourite list and press OK button to remove.You can press OK button again to re- add a channel.
•To activate Favourites, go to the Configuration menu and select Favourite mode. Use “
” / “ 
” to set Favourite mode as on. To cancel Favourites, set Favourite Mode to Off.
On Screen Help
For all menus, press the INFO button to display the help information about the menu functions. For Channel List menu the following message is displayed on the screen:
Program Guide
This section is same with the instructions given in the General Operations page. Please see Electronic Programme Guide (EPG) section in the General Operations part.
Timers
To display timers window, activate the item from the main menu. To add a timer, press the YELLOW button on the remote control. Then “Add Timer” window appears.
Channel: “
” or “
” keys will navigate the user through the TV or Radio list.
Date: Starting date is entered via the Left/Right or the numeric buttons.
Start: Starting time is entered via the Left/Right or the numeric buttons.
End: Ending time is entered via the Left/Right or the numeric buttons.
Duration: Duration between Start and End time.
Repeat: You can set a timer to be repeated as Once, Daily or Weekly.
Change/Delete: permits or prohibits any modifications for other users.
You can save the adjustments by pressing the GREEN key or cancel the process by pressing the RED button. You can edit the list via GREEN key and delete with the RED button.
When a programmed timer is due, the following message will be displayed on the screen for switching to the programmed channel (if it is not the current channel).If you press No, timer will be cancelled.
Note: Please do not press standby button while this OSD is on screen