Notes:
•For VIDEO connection, please refer to “BASIC CONNECTIONS”.
•Please refer to the instruction manual of your amplifier.
•When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made.
Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder (Example 4)
To digital audio input
*Optical cable (not supplied)
| To DIGITAL OUT jack | |||
|
| COMPONENT VIDEO OUT |
| |
| Y | PB | PR |
|
| VIDEO OUT |
|
|
|
| SELECT |
|
|
|
| S |
|
|
|
R | L |
| OPT. | |
|
|
| ||
| COMPONENT | AUDIO OUT | VIDEO OUT | DIGITAL |
|
| OUT | ||
Before connecting, remove the protective cap from the jack. Replace the cover when the jack is not in use.
Front left |
speaker |
Surround left |
speaker |
Center speaker
Front right
speaker
Subwoofer
Surround right
speaker
*Please consult your local audio/video dealer.
To enjoy Dolby Digital sound
Select “Dolby Digital BitStream” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.)
To enjoy DTS sound
Select “DTS On” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.)
To enjoy MPEG2 sound
Select “MPEG BitStream” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.)
Connecting to a Digital Amplifier (Example 5)
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
You can enjoy 2 Channel Digital Stereo Sound. |
| Amplifier with an optical digital input |
| |||
|
|
|
|
|
| |
|
|
|
|
| To digital audio input |
|
Before | connecting, |
| *Optical | cable |
| |
| (not supplied) |
| ||||
remove the protective cap |
|
| ||||
|
|
|
|
| ||
from the jack. Replace the |
|
|
|
|
| |
cover when the jack is not | To DIGITAL OUT jack |
| ||||
in use. |
|
| ||||
|
|
| COMPONENT VIDEO OUT | Front left | Front right | |
|
| Y | PB | PR | speaker | speaker |
|
| VIDEO OUT |
|
| ||
|
| SELECT |
|
|
|
|
|
| S |
|
|
|
|
| R | L |
| OPT. |
| |
|
|
|
|
| ||
|
| COMPONENT | AUDIO OUT | VIDEO OUT | DIGITAL |
|
|
|
| OUT |
| ||
To enjoy 2 Channel Digital Stereo sound
Select “Dolby Digital LPCM”, “MPEG LPCM”, and “DTS Off” in “Setting Digital Out” on the INITIAL SETTINGS. (See page E29.) Note:
If “DTS On” is selected, loud noise will occur. (See page E29.)
*Please consult your local audio/video dealer.