Sanyo DVD-SL25 Basic Connections, Connecting to a Conventional TV Example, Using the S-VIDEO jack

BASIC CONNECTIONS

Connecting to a Conventional TV (Example 1)

Connect the DVD video player to your TV.

DVD video player

		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L		OPT.
	COMPONENT	AUDIO OUT	VIDEO OUT	DIGITAL
				OUT

To AC 120V, 60Hz	(White)L
(Red)R

To VIDEO OUT jack (Yellow)

TV with Audio/Video input jacks

To AUDIO OUT jacks

Audio/Video cable (supplied)

AUDIO R-AUDIO-L VIDEO VIDEO

INPUT

1

To audio input jacks

Notes:

•Please refer to your TV instruction manual.

•When you connect the DVD video player to your TV, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made.

•If your TV has one audio input jack, connect the AUDIO OUT jacks of the DVD video player to a Y-cable adapter (not supplied), then connect it to the TV Audio input. Please consult your local audio/video dealer.

•Do not connect the DVD video player to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected.

Using the S-VIDEO jack

Note:

Please follow the steps before turn on the power.

1.If your TV has the S-video input jack, connect the DVD video player with the S-video cable (not supplied). (The VIDEO OUT jack connection is not necessary.)

You can enjoy clearer picture playback.

2.Set the VIDEO OUT SELECT switch to the S position.

3.You also need to connect the left and right audio cables (not supplied) to the AUDIO OUT jacks of DVD video player and the Audio input jacks of the TV.

DVD video player		TV
	Y
VIDEO OUT
SELECT
S		S-VIDEO IN 1
	R
S-VIDEO OUT
COMPONENT
To S-VIDEO
OUT jack		To S-video input jack
		*S-video cable
		(not supplied)

R	L	To video input jack
(Red)	(White)
		(Yellow)

Using the COMPONENT VIDEO OUT jacks

Note:

Please follow the steps before turn on the power.

1.If your TV has the component video input jacks, connect the DVD video player to these jacks. (The VIDEO OUT or S-VIDEO OUT jack connection is not necessary.)

You can enjoy high quality picture playback.

2.Set the VIDEO OUT SELECT switch to the COMPONENT position.

3.You also need to connect the left and right audio cables (not supplied) to the AUDIO OUT jacks of DVD

video player and the Audio input	TV
jacks of the TV.

4.Set the DVD video player to the INTERLACE position. See page E13.

		COMPONENT VIDEO OUT
	Y	PB	PR
	VIDEO OUT
	SELECT
	S
S-VIDEO OUT	R	L		COMPONENT VIDEO INPUT
	COMPONENT
		AUDIO OUT	VIDEO OUT	Y	PB	PR
	Green	Blue	Red	Green	Blue	Red

*Please consult your local audio/video dealer.

*Component video cable (not supplied)

-E6-