Sanyo DVD-SL25 Setting Digital Out, 96kHz Lpcm 96kHz Liner Pulse Code Modulation, Dolby Digital

Setting Digital Out

If the optical DIGITAL OUT jack is connected to the amplifier, you must set as follows:

1.Press [SETUP] in the stop mode. The setup screen appears.

Language Display Digital Out Parental

2.Press [a] to select “Digital Out”.

3.Press [ENT].

“Digital Out” screen appears.

Language	Display			Digital Out	Parental
96kHz LPCM		48 kHz LPCM
Dolby Digital		LPCM
DTS			Off
MPEG		LPCM

4.Press [p] or [o] to select the item (highlighted).

5.Press [ENT].

The submenu appears. Example:

96kHz LPCM	48 kHz LPCM
Dolby Digital	LPCM	LPCM
DTS	Off	BitStream
MPEG	LPCM

6.Press [p] or [o] to select the submenu (highlighted). Example: To select “Dolby Digital BitStream”

96kHz LPCM	48 kHz LPCM
Dolby Digital	LPCM	LPCM
DTS	Off	BitStream
MPEG	LPCM

7.Press [ENT].

(In this example, “Dolby Digital BitStream” remains.)

8.Repeat steps 4 ~ 7 for other items.

9.Press [o] to skip back to the setup screen (or press [SETUP]).

	z /ON	LAST MEMO	PICTURE	OPEN/CLOSE
			MODE
	SURROUND PROGRAM/RANDOM		REPEAT	A-B REPEAT
	ON SCREEN	ZOOM	ANGLE	ANGLE
				REPLAY
SETUP	SUBTITLE	SETUP		MENU
	CHANGE				o
	SUBTITLE		4
	ON/OFF				a
ENT		b	ENT	a
	AUDIO	TOP MENU		RETURN	p
			5
	REV SLOW			FWD SLOW
		PAUSE/STEP
	PREV			NEXT
		PLAY
	REV			FWD
				CLEAR

1 2 3 C

4 5 6 0

SEARCH

MODE

7 8 9

96kHz LPCM (96kHz Liner Pulse Code Modulation):

If your amplifier is available for 96kHz sampling, select “96kHz LPCM”. If not, select “48kHz LPCM”.

Notes:

•When “48kHz LPCM” is set, there are 48kHz LPCM audio signals from the AUDIO OUT jacks, not 96kHz LPCM audio signals.

•When playing back the DVD video disc which recorded with 96kHz LPCM, there is no digital output.

•But playing back the DVD video disc with no copyright protection, the sound is original recorded sound.

Dolby Digital:

If your amplifier has Dolby Digital Decoder, select “BitStream”. If not, select “LPCM”.

DTS:

If your amplifier has DTS Decoder, select “On”. If not, select “Off”.

MPEG (Moving Picture Expert Group):

If your amplifier has MPEG2 Decoder, select “BitStream”. If not, select “LPCM”.

-E29-