Sanyo DVD-SL25 instruction manual Troubleshooting Guide, Symptom Possible Cause Corrective Action

Page 33

TROUBLESHOOTING GUIDE

If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

 

 

 

No power.

No power plug connection at the AC wall outlet.

Insert the power plug into the AC wall outlet.

 

 

 

The power is on, but the player does not

No disc is loaded.

Load a disc.

work.

 

 

 

 

 

No picture.

An unplayable disc is loaded.

Load a playable disc. (Check the disc logo, type,

 

 

color system and regional code. See page E12.)

 

 

 

 

The TV is not set to receive signal from the player.

Select the correct input function on the TV.

 

 

 

 

The video cable is not connected.

Connect the video cable into the jack.

 

 

 

 

The S-video cable is not connected.

Connect the video cable into the jack.

 

 

 

 

“PROGRESSIVE” mode is set.

Select “INTERLACE” mode. (See page E13.)

 

 

 

No sound.

The TV is turned off.

Turn on the TV.

 

 

 

 

The audio cables are not connected.

Connect the audio cables into the jacks.

 

 

 

 

The audio equipment is turned off.

Turn on the audio equipment connected with the

 

 

audio cable.

 

 

 

The playback picture is poor.

An unplayable disc is loaded.

Load a playable disc. (Check the disc logo, type,

 

 

color system and regional code. See page E12.)

 

 

 

“ ” appears on the TV screen.

The selected function does not operate on the disc

The feature or action cannot be completed at this

 

now.

time because:

 

 

• The feature is not available at the moment.

 

 

• The DVD software restricts it.

 

 

• The DVD software doesn’t support the feature

 

 

(e.g., angles).

 

 

 

The unit does not start playback.

No disc is loaded.

Load a disc.

 

 

 

 

An unplayable disc is loaded.

Load a playable disc. (Check the disc logo, type,

 

 

color system and regional code. See page E12.)

 

 

 

 

The disc is loaded with the label side down.

Load the disc on the disc tray correctly.

 

 

 

 

The disc is dirty.

Clean the disc or replace it. (See page E12.)

 

 

 

 

“PARENTAL” is set.

Cancel the parental lock function or change the

 

 

rating level. Reset it after play. (See page E30.)

 

 

 

“No Play” appears on the TV screen.

An unplayable disc is loaded.

Load a playable disc. (Check the disc logo, type,

 

 

color system and regional code. See page E12.)

 

 

 

 

“PARENTAL” is set.

Cancel the parental lock function or change the

 

 

rating level. Reset it after play. (See page E30.)

 

 

 

 

The disc may not have the correct file or data.

Load a playable disc.

 

 

 

The disc tray does not open.

The disc tray may be locked.

Press the q button on the unit until “Un-LOC”

 

 

appears. (See page E14.)

 

 

 

The FL display on the unit is dark.

The display is set to “Dark”.

Reset it to “Normal”. (See page E28.)

 

 

 

-E32-

Image 33
Contents 1AD6P1P1806-A CA DVD-SL25Accessories ContentsTo enjoy Dolby Digital sound Please Read This ManualFront Panel ControlsFL Display Rear PanelRemote control range Remote ControlControls Inserting batteriesChoosing a Connection Before ConnectionTV Connection TV and Amplifier ConnectionConnecting to a Conventional TV Example Using the S-VIDEO jackBasic Connections Using RF Modulator JacksVCR Connecting to a TV with Progressive-scan Capability Example To Audio OUT jacksTo AC 120V, 60Hz Red White Using the Component Video OUT jacks Note Connecting to an Audio System and TV ExampleAdditional Connection Examples Connect the DVD video player to an Audio System and a TVConnecting to a Digital Amplifier Example Do not damage the power cord Power SupplyFor Safe and Efficient Operation Center Speaker Front left Front rightPlayable Discs Preparations Basic OperationBasic Playback Important NoteStop Stopping PlaybackIf a DVD disc menu screen appears on the TV screen To lock the disc traySelecting a Top Menu DVD Selecting a DVD MenuChapter Track Skip Skipping forwardChapter Search DVD Title Search DVDTime Search DVD Time Search CDSlow Motion Playback DVD Fast PlaybackStill Picture Pause Frame by Frame Advance Playback DVDPicture Zoom Pin Point Zoom DVD Viewing from a Desired Camera Angle Multi-Angle DVDAngle Replay Designated Range Repeat Playback Repeat PlaybackRepeat Point aProgrammed Playback CD Random Playback CDSelecting Audio Soundtrack Language Multi-Language DVD Selecting Subtitle Language DVDSelecting On-Screen Information Selecting Picture ModeExample for DVD Press on ScreenBefore Starting MP3/WMA CD OperationMP3/WMA CD Playback 000000File Skip PauseKodak Picture CD Playback Picture Disc OperationButton4 5 6 To stop the slide show, press n. The thumbnail picturesJpeg CD Playback Picture ZoomIf the disc is mixed with MP3, WMA and Jpeg files… Initial Settings Setting LanguageOSD Setting Display 96kHz Lpcm 96kHz Liner Pulse Code Modulation Setting Digital OutDolby Digital Mpeg Moving Picture Expert GroupPress Setup Setup screen disappears Setting ParentalIf you forget the password… ButtonsCode Abbreviation Language Language Code ListSymptom Possible Cause Corrective Action Troubleshooting GuideMaintenance SpecificationsCleaning the cabinet Applewood Cres Concord, Ont. L4K 5C7 905 R12 Sanyo Canada IncE35