Cobalt Networks 9032 owner manual Card Control and Status, Menu Structure, Video Submenu

Page 12

Card Control and Status

Card Status

The card indicates the status of the input signal with the four blue LEDs labeled with the different supported formats (1080, 720, 625, 525). When the card has locked to a particular input format, that LED will be illuminated. When the card has not locked to a particular video format, the card will search all possible formats, and the lights will cycle rapidly.

Menu Navigation

The card can be configured from a menu system built in to the front card edge. This provides an intuitive and easy to use method for exploring and using the features of the card.

The menu is navigated by using the toggle switch and the two push buttons. The lower button is the “Enter” button to enter a submenu, and the upper button is the “Exit” button to exit a submenu. Moving the toggle switch up or down moves up or down in menu choices, and pressing the buttons moves in or out of sub menus.

The menu LEDs will illuminate from top to bottom to indicate increasing depth in the menu.

Menu Structure

Video Submenu

Menu Structure

 

Parameter Type

Vid

Proc

Unty

Proc Unity

 

 

Gain

Proc Gain

 

 

Lift

Proc Lift

 

 

Sat

Proc Sat

 

 

Phas

Proc Phase

 

Dec

SDIN

Decoder SD input

 

 

HDIN

Decoder HD input

 

 

PED

Pedestal - SD Setup

 

Sorc

 

Set SDI or analog priority

Proc Unity

Resets all of the proc controls to unity value.

Proc Gain

This is Luma (Y channel) gain, expressed as a percentage. It ranges from 0.0% to 200.0% in 0.1% steps.

Proc Lift

This is Luma (Y channel) offset, expressed as an actual video value ranging from -1024 to 1024. If set to 0 no change is made. If set to 1024 absolute black (value 004) becomes absolute white (value 3FB). If set to –1024, absolute white becomes absolute black.

Page 12 of 24

9032 Owner’s Manual (V 2.0)

Image 12
Contents 9032 Copyright TrademarksImportant Regulatory and Safety Notices Symbol MeaningsImportant Safety Instructions Environmental Information Contents Introduction This ChapterWord of Thanks OverviewFunctional Block Diagram Supported Audio and Video FormatsDocumentation Terms Installation and Setup Static DischargeUnpacking Rear Module Installation Optional Rear Module InstallationRear Module Available for BNC Designations for the Card Rear Module available forBoard Installation Software VersionCard Control and Status Menu StructureVideo Submenu Frame Sync Submenu Preset Submenu Display SubmenuInformation Submenu Remote Control Using the Menus and Menu DescriptionsDashBoard Control System Software Presets Video SignalFrame Sync ControlsVideo Proc Technical Specifications Reference Video InputOther Service Information Troubleshooting ChecklistWarranty and Repair Policy Case of ProblemsOrdering Information Related ProductsStandard Equipment Optional EquipmentContact Us Contact Cobalt Digital IncVisit us at the Cobalt Digital Inc. website