Cobalt Networks 9032 owner manual Board Installation, Software Version

Page 11

Board Installation

Use the following steps to install the card in the openGearTM 8310 frame:

1. Refer to the Owner’s Manual of the openGearTM 8310 frame to ensure that the frame

 

 

is properly installed according to instructions.

 

 

 

 

 

 

Heat and power distribution requirements within a frame may dictate

 

 

 

specific slot placement of cards. Cards with many heat-producing

 

 

 

components should be arranged to avoid areas of excess heat build-up,

 

Warning

 

particularly in frames using convection cooling.

 

 

 

 

 

 

2. After selecting the desired frame installation slot, hold the card by the edges and

 

 

carefully align the card edges with the slots in the frame. Then, fully insert the card

 

 

into the frame until the rear connection plugs are properly seated on the midplane and

 

 

rear modules.

 

This completes the procedure for installing the card in the openGearTM 8310 frame.

Software Version

￿This manual is written for software release number 2.0.

￿To view the current software release number of your 9032 check the information submenu on the front edge controls or the card info menu in DashBoard.

￿To upgrade your 9032 software, go to the download page at www.cobaltdigital.com to download the latest release, and upload the file through DashBoard (see DashBoard user manual, 3-5).

9032 Owner’s Manual (V 2.0)

Page 11 of 24

Image 11
Contents 9032 Trademarks CopyrightImportant Safety Instructions Important Regulatory and Safety NoticesSymbol Meanings Environmental Information Contents Overview IntroductionThis Chapter Word of ThanksDocumentation Terms Functional Block DiagramSupported Audio and Video Formats Unpacking Installation and SetupStatic Discharge Rear Module Installation Rear Module Installation OptionalBNC Designations for the Card Rear Module available for Rear Module Available forSoftware Version Board InstallationVideo Submenu Card Control and StatusMenu Structure Frame Sync Submenu Display Submenu Preset SubmenuInformation Submenu DashBoard Control System Software Remote ControlUsing the Menus and Menu Descriptions Controls PresetsVideo Signal Frame SyncVideo Proc Technical Specifications Other ReferenceVideo Input Troubleshooting Checklist Service InformationCase of Problems Warranty and Repair PolicyOptional Equipment Ordering InformationRelated Products Standard EquipmentVisit us at the Cobalt Digital Inc. website Contact UsContact Cobalt Digital Inc