Cobalt Networks 9032 owner manual Display Submenu, Preset Submenu

Page 14

Frame Latency

Specifies the smallest amount of latency allowed by the frame sync. This latency measurement is in frames of the output video. The frame sync will not output a frame unless the specified number of frames are captured in the buffer. Minimum latency is three lines and zero frames in all video modes. The maximum latency is format dependent. The operational latency of the frame sync is always between the specified minimum latency and minimum latency plus one frame (not one field).

Audio Delay

Specifies the amount of additional audio delay after matching video delay. When the change is under one and a half frames, the change in audio delay will be applied without interrupting audio. When changing audio delay more than a frame and a half at a time, there will be a slight audio glitch.

Video Delay

Reports the current amount of video delay in ms.

Reset Frame Sync

Resets the frame sync, clearing any buffered audio and video. You must reset the framesync after manipulating the horizontal and vertical offset in order re-establish correct audio and video co-timing.

Display Submenu

Menu Structure

Parameter Type

Disp

H/V

Display Orientation

 

BRGT

Display Brightness

Display Orientation

This parameter lets you change the orientation of the display. “Vert” makes the characters look correct when the cards are mounted in a 2 RU frame like the 8310. “Horz” makes the characters look right in a horizontal frame.

Display Brightness

This parameter allows you to set the standard output brightness of the menu display. It is a percentage of maximum brightness.

Preset Submenu

MENU STRUCTURE

Parameter Type

Prst

Slct

Select Preset

 

Save

Save Settings

 

Load

Load Settings

 

Fact

Restore Factory Settings

Select Preset

Select from one of the five saved presets.

Save Settings

In this parameter, move the toggle switch up to save the settings to the card persistent storage.

Page 14 of 24

9032 Owner’s Manual (V 2.0)

Image 14
Contents 9032 Copyright TrademarksImportant Safety Instructions Important Regulatory and Safety NoticesSymbol Meanings Environmental Information Contents Word of Thanks IntroductionThis Chapter OverviewDocumentation Terms Functional Block DiagramSupported Audio and Video Formats Unpacking Installation and SetupStatic Discharge Rear Module Installation Optional Rear Module InstallationRear Module Available for BNC Designations for the Card Rear Module available forBoard Installation Software VersionVideo Submenu Card Control and StatusMenu Structure Frame Sync Submenu Preset Submenu Display SubmenuInformation Submenu DashBoard Control System Software Remote ControlUsing the Menus and Menu Descriptions Frame Sync PresetsVideo Signal ControlsVideo Proc Technical Specifications Other ReferenceVideo Input Service Information Troubleshooting ChecklistWarranty and Repair Policy Case of ProblemsStandard Equipment Ordering InformationRelated Products Optional EquipmentVisit us at the Cobalt Digital Inc. website Contact UsContact Cobalt Digital Inc