ADC ADDC1 instruction manual Audio Performance

Page 28

Audio Performance

Fs = 44.1 to 192 kHz, 20 to 20 kHz BW, 1 kHz test tone, 0 dBFS = +24 dBu (unless noted)

SNR – A-Weighted, 0 dBFS = +8 to +29 dBu

121 dB

SNR – Unweighted, 0 dBFS = +8 to +29 dBu

119 dB

SNR – A-Weighted at max gain, 0 dBFS = -14 dBu

108 dB

THD+N, 1 kHz at –1 dBFS

-102 dBFS, -101 dB, 0.00089%

THD+N, 1 kHz at –3 dBFS

-107 dBFS, -104 dB, 0.00063%

THD+N, 20 to 20 kHz test tone at –3 dBFS

-106 dBFS, -103 dB, 0.00071%

Frequency Response at Fs=192 kHz

-3 dB, +0 dB, 2 Hz to 92 kHz

 

+/- 0.01 dB, 20 Hz to 20 kHz

 

-0.06 dB at 10 Hz

 

-0.01 dB at 20 Hz

 

-0.00 dB at 20 kHz

 

-0.18 dB at 88 kHz

 

-3 dB at 92 kHz

 

-100 dB at 108 kHz

Frequency Response at Fs=96 kHz

-3 dB, +0 dB,1 Hz to 46 kHz

 

+/- 0.01 dB, 20 Hz to 20 kHz

 

-0.06 dB at 10 Hz

 

-0.01 dB at 20 Hz

 

-0.00 dB at 20 kHz

 

-0.10 dB at 44 kHz

 

-3 dB at 46 kHz

 

-108 dB at 54 kHz

Frequency Response at Fs=48 kHz

3 dB, +0 dB, 1 Hz to 23 kHz

 

+/- 0.01 dB, 20 Hz to 20 kHz

 

-0.06 dB at 10 Hz

 

-0.01 dB at 20 Hz

 

-0.00 dB at 20 kHz

 

-0.10 dB at 22 kHz

 

-3 dB at 23 kHz,

 

-110 dB at 27 kHz

Passband Ripple

+/- 0.008 dB

Crosstalk

-105 dB at 20 kHz

 

-130 dB at 1 kHz

 

-200 dB at 20 Hz

ADC1 Instruction Manual

Page 28

Image 28
Contents Benchmark ADC1 Channel 24-bit 192-kHz Audio Analog-to-Digital ConverterSafety Information Federal Communications Commission FCC Notice OnlyContents Overview Page Features Connections Balanced Analog Line InputsClock Reference Input To adapt to unbalanced sourcesAES/EBU XLR Output Digital OutputsOptical Output Adat Optical Output Mode Adat S/MUX2 Optical Output ModeAdat S/MUX4 Optical Output Mode SPDIF/AES BNC Main and Aux OutputsWord Clock Reference Output AC Power Entry ConnectorFuse Holder Mode Switch and Display To program the conversion modeOperation Programming the OutputsSelecting a Fixed Frequency Using the Internal Clock Source Reading Sample Rates off of the Mode DisplayTo synchronize with an external clock source To select a fixed sample frequency on the Main OutputsResetting the ADC1 to Factory Default Settings Programming the Aux OutputAdat or AES/EBU on the Optical Output Meter DisplayFirst Stage Gain Adjusting Input GainSecond Stage Gain Controls Rack Mounting Using Adat S/MUX Proper S/MUX Identification is a MustSample Rate is the Key that Controls S/MUX MUX should not be used for Sample Rate ConversionUltraLock … What is It? Problem #1 Put UltraLock converters to the testWhat UltraLock converters cannot do Performance Frequency ResponseInter-Channel Phase Response KHz LPF unweighted THD+N vs. Level, 1 KHz32K B-H FFT, Idle Channel Noise 32K B-H FFT, -3 dBFS, 1 KHz 32K B-H FFT, -3 dBFS, 10 KHz Analog Audio Inputs SpecificationsWorldclock Reference Output Digital Audio Outputs Audio Performance Group Delay Latency LED Status IndicatorsDimensions AC Power RequirementsWeight Page Warranty Information Benchmark 1 Year WarrantyBenchmark Extended 5* Year Warranty Benchmark Extended WarrantyBenchmark Media Systems, Inc