Connections (Continued)
Optional, Preferred TV Connections
ote
You can ONLY listen to DVD playback using COAXIAL
(X), OPTICAL (O) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.)
Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (for A1 or A2 connection) supplied.
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a
1 | Connect one of the DVD+VCR’s DIGITAL AUDIO |
OUT jacks (COAXIAL X or OPTICAL O) to the |
corresponding in jack on your amplifier. Use an optional digital (COAXIAL X or OPTICAL O) audio cable.
2 You will need to activate the DVD+VCR’s digital output. (See “Digital Audio Output” on page 20).
Digital Multi-channel sound
A digital
Caution:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
otes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital
–To see the audio format of the current DVD in the on- screen display, press AUDIO.
Rear of DVD+VCR
A1 | A2 | X | O |
L | R | COAXIAL | OPTICAL |
AUDIO INPUT | DIGITAL INPUT | ||
Amplifier (Receiver)
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VCR IN LINE 1 or LINE 2 jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using the optional audio/video cables.
Accessory Device Jack Panel
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
OR
Rear of DVD+VCR | Front of DVD+VCR |
14