Zenith XBV342 warranty DVD Operation Setup, Sound, Others

Page 20

DVD Operation Setup (Continued)

Sound

Digital Audio Output

Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.

DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select Stream/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.

PCM: Select when connected to a 2 channel digital stereo amplifier. The DVD+VCR outputs sounds in the PCM 2ch format when you play a DVD video disc recorded with a Dolby Digital, MPEG1, or MPEG2 recording system.

 

 

Disc Audio

DIGITALDOLBY /PCM

 

 

Disc Subtitle

Stream/PCM

 

 

Disc Menu

PCM

 

 

Rating

 

 

 

Country Code

Sample Freq.

 

 

 

 

TV Aspect

48 KHz

 

 

Menu Language

96KHz

 

 

Progressive Scan

 

 

 

Digital Audio Output

 

 

 

5.1 Speaker Setup

 

 

 

Others

 

 

 

 

 

Sample Frequency

To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated above.

If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.

Others

The DRC, Vocal and Auto Play settings can be changed.

Use v/V to select the desired option and then press SELECT/ENTER repeatedly to select On or Off.

 

Disc Audio

DRC On

 

Disc Subtitle

Vocal On

 

Disc Menu

 

 

Rating

Auto Play off

 

 

 

Country Code

 

 

TV Aspect

 

 

Menu Language

 

 

Progressive Scan

 

 

 

 

 

Digital Audio Output

 

 

5.1 Speaker Setup

 

 

Others

 

Dynamic Range Control (DRC)

With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.

Auto Play DVD

You can set up the DVD Player so a DVD disc automat- ically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will search for a title that has the longest playback time and then play back the title automatically.

On: Auto Play function works.

Off: Auto Play function does not work.

ote

The Auto Play function may not work for some DVDs.

20

Image 20
Contents Installation and Operating Guide Warranty Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Remote Control Battery Installation Remote Control Operating RangeBefore Use Playable DiscsSelecting the Viewing Source PrecautionsAbout Symbols Front Panel Controls Display Window RECRemote Control Connections Panel Connecting Antenna/Cable TV to ConnectionsHow to set up the DVD+VCR’s RF output channel Connections Basic TV ConnectionsRF coaxial connection Audio/Video connectionVideo connection Component Video Color Stream connectionProgressive Scan ColorStream pro connection DVD+VCR Connection Panel OteAccessory Audio/Video A/V Connections to Digital Multi-channel soundRear of DVD+VCR Amplifier ReceiverMenu Selection VCR Operation Setup On-Screen Display OSDOn-Screen Menus Setup VCR Operation Setup VCR Setup Menu Options Channel SelectionManual Clock Set VCR Operation Setup Setting the ClockAuto Clock Set DVD Operation Setup General Explanation On-Screen DisplayOn-screen display operation Temporary Feedback Field IconsDVD Operation Setup Initial Settings General OperationLanguage PictureOthers DVD Operation SetupSound Rating DVD VCR Operation Normal Playback Special Effect PlaybacksTimer Recording VCR Operation Normal RecordingTo pause recording To record one TV program while watching anotherProgram Priority Checking Erasing Timer Record ProgrammingVCR Operation Instant Timer Recording Checking the Recording TimeTo extend the Recording Time Dubbing and EditingMultichannel TV Sound Indicator MTS VHS Hi-Fi Stereo System MTS BroadcastMTS Multi-Channel TV Sound Playback with Hi-Fi Stereo Audio SoundVCR Operation Tape Counter Memory Feature Additional InformationGeneral Features DVD Operation Playing DVDsDVD Operation General Features Special DVD Features Operation with Audio CD and MP3/WMA Disc About WMA Window Media AudioSelecting other Tracks CD MP3 WMA Repeat Track/All/Off CD MP3 WMARepeat A-B CD 3D Surround CDJpeg File Operation Viewing Jpeg Files on a Disc Jpeg Selecting other FilesStill Picture To flip the pictureProgrammed Playback CD MP3 WMA Programmed Playback with Audio CDs and MP3/WMA DiscsTroubleshooting Symptom Cause CorrectionSecurely DVD+VCRDVD+VCR is in Timer mode Moisture CondensationLanguage Code List Language CodeCountry Code List Code CountrySpecifications VCR SpecificationsDVD Specifications GeneralWarranty Period HOW Service is Handled