Zenith XBV342 warranty DVD+VCR is in Timer mode, Moisture Condensation

Troubleshooting (Continued)

Symptom	Cause	Correction
Some channels are	Those channels were deleted with the	Use CH. ADD/DEL. to restore channels.
skipped over when	CH. ADD/DEL option.	See “Channel Selection” on page 16.
using CH/TRK (v/V)
Picture and sound of	Antenna or cables are loose.	Tighten connections or replace cable.
broadcasting channel
are weak or missing.
	Wrong TUNING BAND option is being	Try all TUNING BAND options. See
	used.	“Channel Selection” on page 16 for
		details.
Camcorder image is not	Camcorder is off.	Turn camcorder on and operate
shown.		properly.
Camcorder image via	DVD+VCR SOURCE SELECT is not set	Press INPUT to select LINE input
A/V input to DVD+VCR	to LINE1 or LINE2.	channel (LINE1 or LINE2).
is not shown on TV
screen.
Timer recording is not	Clock in DVD+VCR is not set to correct	Set clock to correct time. See “Setting
possible.	time.	the Clock” on page 17.
	Timer has been programmed	Reprogram Timer. See “Timer
	incorrectly.	Recording” on pages 23 and 24.
	indicator does not appear after pro-	Reprogram Timer.
	gramming timer.
indicator appears	DVD+VCR is in Timer Recording mode.	This is the normal indication that the
after DVD+VCR is turned		DVD+VCR is in TIMER mode.
off.
Stereo Audio Record	TV is not Stereo-compatible.	No action is possible.
	Broadcast program is not in stereo for-	No action is possible.
and/or Playback is not
	mat.
present.
	DVD+VCR A/V Out jacks are not con-	Make A/V connections. Stereo is
	nected to TV A/V In jacks.	available only via A/V output from
		DVD+VCR.
	DVD+VCR Audio/Video Out is not	Select AUX or A/V source as TV input.
	selected for viewing at the TV.
	DVD+VCR BROADCAST TYPE mode is	Set BROADCAST TYPE mode to
	set to SAP or MONO.	STEREO. See “VCR Setup Menu
		Options” on page 16.

Moisture Condensation

Moisture condensation can occur:		In locations where moisture condensation may occur:
•	When the DVD+VCR is moved from a cold place to a	•	Keep the DVD+VCR plugged into an AC power outlet
	warm place.		with POWER On. This will help prevent condensation.
•	Under extremely humid conditions.	•	When condensation has occurred, wait a few hours
			for the DVD+VCR to dry before using it.

36