Zenith XBR411 warranty Disc Finalize, Disc Protect, AutoPlay, Finalize menu appears.Press Enter

Before Operation (Continued)

Disc Finalize

Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing DISC MENU/LIST or TITLE.

Caution

Once you have finalized a DVD-R disc, you cannot edit or record anything else on that disc. However, you can record and edit a DVD-RW disc by choosing Unfinalize.

Disc Initialize
Disc Finalize	Finalize
Disc Label	Unfinalize
Disc Protect
AutoPlay

Prev. Select Close

Follow steps 1-3 as shown on page 24 (Disc

1 Initialize).

2Use v / V to select the “Disc Finalize” option.

3 Press B to move to the third level. Finalize is highlighted.

4Finalize menu appears.Press ENTER ( ).

Finalize

Do you want finalization?

OK Cancel

5The VCR/DVD Recorder starts finalizing the disc.Use b / B to select OK then press ENTER ( ).

Note :

Finalization can take up to 3-4 minutes or more depend- ing on the type of disc, how much is recorded on the disc, and the number of titles on the disc.

Tips :

•If you load a DVD-RW that has already been final- ized, you can ‘Unfinalize’ it by choosing Unfinalize from the Finalize menu. After doing this, you can edit and re-record onto the disc.

•You cannot unfinalize a DVD-R disc.

Disc Protect

When recording in VR mode formatted DVD-RW disc, set to ON to prevent accidental recording, editing or erasing of the disc loaded.

If you need to unlock the disc to make edits, select OFF.

Disc Initialize
Disc Finalize
Disc Label
Disc Protect	OFF
AutoPlay	ON
Prev.	Select	Close

AutoPlay

When you load a DVD with AutoPlay turned on, the VCR/DVD Recorder will bypass the Disc menu and trailers and start playing the movie automatically.

Set “AutoPlay” to ON or OFF.

Disc Initialize
Disc Finalize
Disc Label
Disc Protect
AutoPlay	OFF
	ON
Prev.	Select	Close

DVR HOOKUP

25