Troubleshooting (Continued)
| Symptom | Cause | Solution |
|
|
|
|
|
|
| Cannot record or did not | The remaining blank space on the disc is | Use another disc. | |
| record successfully. | insufficient. |
|
|
|
|
|
|
|
|
| The source you are trying to record is copy- | You cannot record the source. | |
|
| protected. |
|
|
|
|
|
|
|
|
| When setting the recording channel, the | Select the channel on the VCR/DVD | |
|
| channel is tuned on the TV’s own tuner. | Recorder’s | |
|
|
|
|
|
|
| When recording to a Video mode disc, pro- | Use a VR mode formatted disc for | |
|
| grams that are | material. | |
|
| be recorded. |
|
|
|
|
|
|
|
| Timer Recording not possi- | Clock in VCR/DVD Recorder is not set to | Set clock to correct time. See “Auto Clock | |
| ble. | correct time. | Set” or “Manual Clock Set” on page 19. | |
|
|
|
|
|
|
| Timer has been programmed | Reprogram Timer. See “Timer Recording” on | |
|
| incorrectly. | page 43. | |
|
| TIMER indicator light does not appear after | Reprogram Timer. | |
|
| programming timer. |
|
|
|
|
|
|
|
| Stereo Audio Record | TV is not | No solution. | |
| and/or Playback not pres- |
|
|
|
| Broadcast program is not in stereo format. | No solution. | ||
| ent. | |||
|
|
|
| |
| VCR/DVD Recorder A/V Out jacks are not | Make A/V connections. Stereo is available | ||
|
| |||
|
| connected to TV A/V In jacks. | only via A/V output from VCR/DVD Recorder. | |
|
|
|
|
|
|
| VCR/DVD Recorder Audio/Video Out is not | Select AUX or A/V source as TV input. | |
|
| selected for viewing at the TV. |
|
|
|
|
|
|
|
|
| VCR/DVD Recorder’s TV audio channel is | Set TV audio channel mode to Stereo. See | |
|
| set to SAP or MONO. | “Changing TV Audio Channel” on page 27. | |
|
|
|
|
|
| Remote control does not | The remote control is not pointed at the | Point the remote control at the remote sensor | |
| work properly. | remote sensor of the VCR/DVD Recorder. | of the VCR/DVD Recorder. | |
|
| The remote control is too far from the | Operate the remote control within 23 ft (7 m). | |
|
| VCR/DVD Recorder. |
|
|
|
|
|
|
|
|
| There is an obstacle in the path of the | Remove the obstacle. | |
|
| remote control and the VCR/DVD Recorder. |
|
|
|
|
|
|
|
|
| The batteries in the remote control are | Replace the batteries with new ones. | |
|
| exhausted. |
|
|
|
|
|
|
|
Reset the VCR/DVD Recorder
If you observe any of the following symptoms...
When the VCR/DVD Recorder is plugged in, but the power will not turn on or off.
When the display window does not working.
When the VCR/DVD Recorder does not operate normally.
You can reset the VCR/DVD Recorder as follows :
Press and hold the POWER button for more than five seconds. This will force the VCR/DVD Recorder to power off. . Press the POWER button again to turn the VCR/DVD Recorder back on.
Unplug the power cord and then plug the power cord again after more than five seconds.
56