Checking Timer Recording Details

Zenith XBR411 warranty Checking Timer Recording Details, Canceling a Timer Recording

Timer Recording

The Timer Recording function allows you to record up to 8 programs within a period of one month.

1The Timer Record menu will appear.Press TIMER REC.

Timer Record

SP 198 min Free

Media

Ch.

Date

Start Time

End Time

Mode

DVD

Ch.11

01/02 Fri

10:07 AM

11:00 AM

TIMER REC Timer Rec List

• Media – Choose a media (DVD or VCR).

•

Ch. – Choose a channel (2-69 or 1-125 for anten-

na or cable channels respectively, excluding skip

channels), or one of the external inputs from

which to record (AV1 or AV2).

•

Date – Choose a date up to 1 month in advance,

or select a daily or weekly program.

•

Start Time – Set the recording start time.

•

End Time – Set the recording end time.

•

Mode – Choose a record mode.

DVD: EP, LP, SP, XP, or AT (Auto)

VCR: SP, SLP, or AT (Auto)

AUTO mode determines how much time is avail-

able on the disc or tape and switches record

mode, if necessary, to complete recording the

program.

Enter the necessary information for your timer

2 recording(s).

•

b / B (left/right) – Move the cursor left/right

•

v / V (up/down) – Change the setting at the cur-

rent cursor position

•

Press RETURN (O) to exit the Timer Record

menu.

•

Press ENTER ( ) after filling in all the program

information.

•

Press TIMER REC to display Timer Record List.

Press ENTER (

) to save the

program.

3 The Timer Record List will appear.

Press RETURN (O) to exit the Timer Record

List.

5Be sure to load a recordable disc or tape.

Note :

•The Timer indicator lights on the front panel display.

•If the Disc and Tape indicator are blinking, either no disc or tape is loaded, or the loaded disc is not recordable.

•The VCR/DVD Recorder will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use the AUDIO button to set the audio before switching the VCR/DVD Recorder to Standby mode.

•You must press STOP to stop the Timer Recording.

•The VCR/DVD Recorder will automatically power off when the Timer Recording ends.

•There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded.

Programming can be checked whenever the VCR/DVD Recorder is turned on. Press TIMER REC twice.

•Use v / V to select a timer recording.

•Press ENTER ( ) to edit the selected program. Timer Record menu appears.

•Press CLEAR to delete the selected program from the Timer Record List.

Timer Record List

Media Ch.	Date	Start Time	Duration	Mode	Check
Ch.11	10/19 Sun	18:07 AM	30min	SP	Rec. OK

Edit

CLEAR Delete

TIMER REC Timer Rec

Canceling a Timer Recording

You can clear a timer setting anytime before the record- ing actually starts.

•Use v / V to select a program you want to erase on the Timer Recorder List. If you want to erase the program, press CLEAR.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still cancel the program.

•Press STOP.

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not record when:

•There is no disc (or tape) loaded.

•A non-recordable disc (or tape) is loaded.

•Disc Protect is set to ON in the Disc menu (see page 25).

•There are already 99 titles recorded on the disc.

You cannot enter a timer program when:

•A recording is already underway.

•The time you’re trying to set has already passed.

•There are already 8 timer programs set.

If two or more timer programs overlap:

•The earlier program takes priority.

•When the earlier program finishes, the later program starts.

•If two programs are set to start at exactly the same time, the program entered first takes priority.

Confirmation is not possible when:

•Disc Protect setting is set to ON.