Warning: Dispose of old batteries promptly and properly. Do not burn or bury them.
Caution: If you do not plan to use the remote control for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.
SETTING THE SYSTEM
1.Use a small screwdriver to set the house code dials on both the remote control and the control center receiver to the same letter. If you already own other Plug ’N Power accessories and are adding the Wire- less Remote Control Center to your system, set both house codes to the same letter as the rest of your system.
2.Set
3.Plug the light or appliance to be controlled into the AC outlet on the bottom of the control center’s receiver, then plug the receiver into a standard AC outlet.
4.Be sure the light or appliance is turned on.
11